KEIM Design-Lasur

Glazes fascinate due to their exceedingly vibrant character: subtle shimmers or powerful radiance, on the facade or indoors, subtle simplicity or spectacular finesse – the immediacy of their effects captures the eyes.

Overview of the KEIM Design-Lasur System

KEIM Design-Lasur (Glaze)

Sol-silicate based, ready-to-use glaze/mineral stain concentrate according to DIN EN 1062-1 for interior and exterior use. For decorative coatings in glaze painting technique or to provide conventional coatings with a special finish. Highly suitable for impressive colour designs. KEIM Design-Lasur can be mixed in any ratio with KEIM Design-Base and/or KEIM Design-Fixativ to achieve the desired degree of translucency.

Colour shade
White, KEIM Palette exclusiv, Avantgarde and full-tone colours D9001 - D9012, D9018 - D9020 (only interior) and D1001 - D1004 (only exterior)

Application
KEIM Lasur brush

Consumption
For one coat: approx. 0.05 l/m2 prepared mixture of Design-Lasur and Design-Fixativ. And approx. 0.1 l/m2 prepared mixture of Design-Lasur and Design-Base

Packaging
1 l, 5 l and 15 l container
Pallet: 24 x 15 l / 70 x 5 l

KEIM Design-Base (Pigment-free additive)

Sol-silicate based, pigment-free additive for KEIM Design-Lasur. Used as thinner for KEIM Design-Lasur to achieve translucent colour designs. For interior and exterior application. KEIM Design-Base allows transparent and mineral matt, low-pigment finishes together with ideal application consistency, reduced settling and weather-resistant layer thicknesses.

Application
KEIM Lasur brush, roller

Consumption
For one coat:
approx. 0.1 l/m² prepared mixture of Design-Lasur and Design-Base

Packaging
5 and 15 l container
Pallet: 24 x 15 l / 70 x 5 l

KEIM Design-Fixativ

Sol-silicate based primer and thinner for KEIM Design-Lasur. Used as pretreatment for strongly absorbing substrates and as dilution for most transparent finishes with KEIM Design-Lasur. For interior and exterior use. Especially recommended for very translucent designs and for finishes in full-tone colour shades.

Application
KEIM Lasur brush

Consumption
For one coat: approx. 0.05 l/m2 prepared mixture Design-Lasur and Design-Fixativ

Packaging
5 and 20 l container
Pallet: 24 x 20 l / 96 x 5 l

KEIM Design-Lasur-Sortiment (Design-Lasur kit)

Selection of Design-Lasur (glaze) concentrates and tool kit in wooden case.

Content
12 cans with 150 ml each (colour shades No. 9001, 9002, 9003, 9005, 9006, 9008, 9009, 9010, 9011, 9012, 9019, 9020)
2 x 0.5 l KEIM Design-Fixativ,
1 stencil, 1 stencil paint brush,
1 flat and 1 small paint brush,
1 oval Lasur brush,
product information

KEIM Design-Lasur-Sortiment (Design-Lasur kit)

SYSTEM AND COMPLEMENTING PRODUCTS
KEIM GLAZE BRUSHES

High-quality, oval glaze brushes from Orel fibres with Chinese bristles

To the product
KEIM Biosil-System

Ready-to-use, ecological silicate paint for interiors.

To the product
KEIM Optil-System

Sol-Silicate interior paint with MacroFill technology

To the product
This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
More details