KEIM Classic MW
The KEIM Classic-MW thermal insulation composite system is particularly economical, non-combustible, woodpecker-proof and sustainable.
Added value through
- the proven quality of KEIM mineral paints and a non-combustible system structure
- long-term colour stability - safe to use
Substrate
- solid masonry
- concrete
- aerated concrete
- vertically perforated brick
- in each case with and without plaster, if necessary, proof of adhesive tensile strength ≥ 0.08 N/mm², in the system lamella, bonded
- if necessary, priming with KEIM Indulaqua
Approval and determination
- non-combustible A2 s1,d0 according to DIN EN 13501
- up to 100 m building height (observe state building regulations!)
- KEIM approval Z-33.43-185 (glued + dowelled)
- lamella up to 200 mm, glued: KEIM approval Z-33.44-188 (glued)
System overview
KEIM Pulverkleber-90
Hydraulically setting, powdery cement-based adhesive.
Adhesive and reinforcing compound for KEIM external thermal insulation composite systems.
- Application
- power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
- Consumption
- approx. 4–5 kg/m² as adhesive or reinforcement.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 36
Coverrock X-2
Rock wool insulation boards in accordance with DIN EN 13162. For use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0.035 W/mK
Other mineral wool insulation boards on request.
- Colour shade
- yellow-brown
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 80 1.50 15.00 10 11 100 1.50 12.00 8 11 120 1.50 9.00 6 9 140 1.00 8.00 8 9 160 1.00 8.00 8 9 180 1.00 6.00 6 9 200 1.00 6.00 6 6
Coverrock II
Rock wool insulation boards according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0.035 W/mK
Other mineral wool insulation boards on request.
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 60 2.00 20.00 10 12 80 1.50 15.00 10 9 100 1.50 12.00 8 8 120 1.50 9.00 6 7 140 1.00 8.00 8 5 160 1.00 8.00 8 5 180 1.00 6.00 6 5 200 1.00 6.00 6 5 220* 0.50 5.00 10 5 240* 0.50 5.00 10 5 260* 0.50 4.00 8 5 280* 0.50 4.00 8 5 300* 0.50 4.00 8 5 - Packaging additional info
- * Delivery time on request. KEIMFARBEN must be informed of the use in ETIC systems.
Speedrock II
Rock wool lamellas according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0,041 W/mK
Other mineral wool lamellas on request.
- Colour shade
- yellow-brown
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 40* 2.88 28.80 10 60 1.92 19.20 10 100 80 1.44 14.40 10 100 100 0.96 11.52 12 100 120 0.96 9.60 10 80 140 0.96 7.68 8 80 160 0.96 5.76 6 80 180 0.96 5.76 6 70 200 0.96 5.76 6 70 220 0.48 4.80 10 70 240 0.48 3.84 8 70 260 0.48 3.84 8 70 280 0.48 3.84 8 70 300 0.48 3.84 8 70 - Packaging additional info
- * on request
ejotherm S1
Universal screw anchor consisting of plastic anchor with plastic plate and pre-mounted plastic screw.
European Technical Assessment (ETA): ETA-17/0991. For flush mounting of insulation boards in KEIM ETIC-Systems according to system approval.
- Colour shade
- black/white
- Plate diameter
- 60 mm
- Packaging
Drill hole depth, flush installation Drill hole depth, recessed installation Dowel length [mm] Panel thickness [mm] Pieces per unit 1 1 0 40 mm (60 mm)* - 60 20** 100 1 1 0 40 mm (60 mm)* - 80 40** 100 1 1 0 40 mm (60 mm)* - 100 60** 100 1 1 0 40 mm (60 mm)* - 100 60 100 1 1 0 40 mm (60 mm)* - 120 80 100 1 1 0 40 mm (60 mm)* - 140 100 100 1 1 0 40 mm (60 mm)* - 160 120 100 1 1 0 40 mm (60 mm)* - 180 140 100 1 1 0 40 mm (60 mm)* - 200 160 100 1 1 0 40 mm (60 mm)* - 220 180 100 1 1 0 40 mm (60 mm)* - 240 200 100 1 1 0 40 mm (60 mm)* - 260 220 100 1 1 0 40 mm (60 mm)* - 280 240 100 1 1 0 40 mm (60 mm)* - 300 260 100 1 1 0 40 mm (60 mm)* - 320 280 100 1 1 0 40 mm (60 mm)* - 340 300 100 1 1 0 40 mm (60 mm)* - 360 320 100 1 1 0 40 mm (60 mm)* - 380 340 100 1 1 0 40 mm (60 mm)* - 400 360 100 1 1 0 40 mm (60 mm)* - 420 380 100 1 1 0 40 mm (60 mm)* - 440 400 100 - Packaging additional info
- * Use category A, B, C, D, (E); Standard values for new building substrates; ** ejotherm® S1 short
- Packaging
Product name Type of container Pieces per unit Dübelteller ejotherm VT 90 carton 100 Dübelteller ejotherm SBL 140 Plus carton 100
ejotherm H1
Universal impact dowel consisting of plastic dowel with plastic plate and pre-assembled composite nail (steel/polyamide) plastic screw.
European Technical Assessment (ETA): ETA-11/0192
- Plate diameter
- 60 mm
- Packaging
Drill hole depth, flush installation Dowel length [mm] Panel thickness [mm] Pieces per unit 1 1 0 35 mm (55 mm) 95 40 (-)* 100 1 1 0 35 mm (55 mm) 115 60 (20)* 100 1 1 0 35 mm (55 mm) 135 80 (40)* 100 1 1 0 35 mm (55 mm) 155 100 (80)* 100 1 1 0 35 mm (55 mm) 175 120 (100)* 100 1 1 0 35 mm (55 mm) 195 140 (120)* 100 1 1 0 35 mm (55 mm) 215 160 (140)* 100 1 1 0 35 mm (55 mm) 235 180 (140)* 100 1 1 0 35 mm (55 mm) 255 200 (160)* 100 1 1 0 35 mm (55 mm) 275 220 (180)* 100 - Packaging additional info
- * Usage category A, B, C, (D, E); Standard values for old building substrates
- Packaging
Product name Type of container Pieces per unit Dübelteller ejotherm VT 90 carton 100 Dübelteller ejotherm SBL 140 Plus carton 100
Ejot Dübelteller VT 2G
Recessed anchor installation in connection with ejotherm STR-U 2G, S1, STR H and STR H A2 from 100 mm insulation board thickness in all mineral wool insulation boards. Recessed setting and screwing in in one operation, to avoid dowel marks, sealing of the insulation material with STR-RondelleMW.
- Colour shade
- white
- Plate diameter
- mind. 90 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Type of container Pieces per unit Ejot Dübelteller VT 2G ab 100 mm mind. 110 mm carton 100 Ejot Dübelteller VT 90 90 mm carton 100 Ejot Dübelteller SBL 140 Plus 140 mm carton 100 Ejotherm STR Rondelle-MW ab 100 mm carton 100 Ejotherm STR Rondelle-EPS grau ab 100 mm carton 100
EJOT Dübelteller VT 90
Plastic anchor plate for ejot screw anchors for flush mounting of mineral wool insulation boards.
- Colour shade
- white
- Plate diameter
- 90 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Pieces per unit Ejot Dübelteller VT 90 90 mm 100 Ejotherm STR-Stopfen 500 Ejot Dübelteller SBL 140 Plus 140 mm 100 Ejot Dübelteller VT 2G ab 100 mm mind. 110 mm 100
EJOT Dübelteller SBL 140 Plus
Plastic anchor plate for Ejot screw anchors for flush mounting of mineral wool lamellas.
- Colour shade
- white
- Plate diameter
- 140 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Type of container Pieces per unit Ejot Dübelteller SBL 140 Plus 140 mm carton 100 Ejotherm STR-Stopfen carton 500 Ejot Dübelteller VT 90 90 mm carton 100 Ejot Dübelteller VT 2G ab 100 mm mind. 110 mm carton 100
KEIM Glasfaser-Gittermatte 4x4
System-associated glass-fibre mesh mat for reinforcement in KEIM external thermal insulation composite systems, room climate systems and for reworking plaster cracks.
Slide-resistant and alkali-resistant.
- Consumption
- approx. 1,1 m²/m²
- Packaging Accessory
Product name Type of container Length [m] m² per bundle m² per pallet Bundle per pallet Treillis d'Armature 4x4 roll 50 55 1,815 33 - Mesh width
- 4 x 4 mm
KEIM Stucasol
Ready-to-use sol-silicate plaster with unique binder concept for a particularly uniform appearance, even without additional coating.
- Application
- power stirrer, feed pump, filler knife, trowel
- Consumption
- Scratch plaster structure:
K1 (1 mm) - approx. 1.5 kg/m²
K1,5 (1.5 mm) - approx. 2.3 kg/m²
K2 (2 mm) - approx. 3.0 kg/m²
K3 (3 mm) - approx. 3.6 kg/m² - Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 25 kg 24
KEIM Brillantputz
High-quality, mineral, thin-layer, lightweight plaster based on white lime, white cement and high-grade marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.
- Colour shade
- White and colors exclusively with pure mineral lightfast pigments. No monochrome shades/full shades available. Minimum order quantity for tinted material 150 kg.
- Application
- power stirrer, filler knife, trowel, rendering machine, feed pump
- Consumption
- Rough plaster 2 mm: approx. 2.2 kg/m²
Rough plaster 3 mm: approx. 3.0 kg/m²
Grooved plaster 2 mm: approx. 2.5 kg/m²
Grooved plaster 3 mm: approx. 3.0 kg/m²
Smooth plaster: approx. 3 - 4 kg/m² applies for 3 mm layer thickness - Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 30
KEIM Mineralputz
High-quality, mineral, thin-layer, lightweight plaster as rough plaster, grain size 5 mm on the basis of white lime, white cement and valuable marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.
- Application
- power stirrer, feed pump, filler knife, trowel, rendering machine
- Consumption
- approx. 5 kg/m²
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 30
KEIM Soldalit
Universal, silicate-based facade paint with a sol-silicate binder (combination of silica sol and water glass) for organic, mineral and mixed substrates as well as ETICS. KEIM Soldalit is water-repellent, highly diffusible, lightfast, UV-stable and extremely weather-resistant with minimal soiling tendency. Organic content < 5%.
KEIM Soldalit is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
- Application
- block brush, roller, airless sprayer
- Consumption
- approx. 0,35 - 0,5 kg/m² for two coatings.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 18 kg 32 bucket 5 kg 70
KEIM Egalisationsfarbe
Single-layer levelling paint. KEIM Ausgleichsfarbe (equalising paint) is a silicate facade paint for levelling stains on coloured mineral renders, especially for levelling coloured, visually inhomogeneous finishing plasters and silicate plasters. KEIM Egalisationsfarbe is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.
- Colour shade
- White and colour shades.
- Application
- block brush, roller, airless sprayer
- Consumption
- approx. 0,20 L/m² for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 15 L 24 bucket 5 L 70 bucket 2.5 L 80
