Jump to the content of the page
Austria | EN
Creative Design

KEIM Design-Glaze

For decorative coatings in glaze painting technique or to provide conventional coatings with a special finish. 

Conquering lightness - transparent elegance with glazes

Glazes fascinate due to their exceedingly vibrant character: subtle shimmers or powerful radiance, on the facade or indoors, subtle simplicity or spectacular finesse – the immediacy of their effects captures the eyes.

KEIM design-glaze products

KEIM Design-Lasur

Ready-to-use glaze concentrate on sol-silicate basis in accordance with DIN EN1062-1 for interior and exterior use. For decorative glaze coatings and for finishing conventional top coats. Excellent for impressive colour designs and creative solutions. In combination with KEIM Design-Base and/or KEIM Design-Fixativ, KEIM Design-Lasur can be adjusted to the desired glaze effect as desired.

Colour shade
White and colour shades. Monochrome shades 9001L-9012L available. Monochrome shades 90018L-9020L available (only for interior use). Monochrome shades 1001L-1004L available (only for outside). For feasibility see colour tool at www.keim.com.
Application
roller, paint brush, paint brush, airless sprayer
Consumption
approx. 100 ml/mΒ² fertig eingestellte Mischung aus Design-Lasur und Design-Base..
For a single coat.
Packaging
Container contentUnit of measureQuantity on pallet
15l24
5l70
1l
KEIM Design-Base

Pigment-free glaze additive on sol-silicate basis for KEIM Design-Lasur. Serves as a thinner for KEIM Design-Lasur for glazing colour design indoors and outdoors. Allows transparent and mineral matt glaze coats with optimum application consistency, low settling behaviour and weather-resistant layer thicknesses.

Colour shade
raw white transparent, milky
Application
paint brush
Consumption
approx. 0,1 l/mΒ² for ready-to-use mixture of KEIM Design-Lasur with KEIM Design-Base and for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket15l24
bucket5l70
KEIM Design-Fixativ

Sol-silicate-based thinner and primer for KEIM Design-Lasur. Used for the pre-treatment of highly absorbent substrates and as a thinner for highly transparent glazes with KEIM Design-Lasur for interior and exterior use.

Especially recommended for glazes in the solid colour range and for highly transparent glazes.

Colour shade
milky
Application
paint brush
Consumption
approx. 0,05 l/mΒ² for ready-to-use mixture of KEIM Design-Lasur and KEIM Design-Fixativ
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can20l24
jerry can5l96
Jump to the top of the page