Jump to the content of the page
Color tool Germany | EN
Classic-Plus system

KEIM Classic-Plus MW auf Plattenwerkstoffen

The thermal insulation composite system KEIM Klassik-Plus-MW on board materials is non-combustible, thick-layered, woodpecker-proof, sustainable and versatile in surface on request on some board materials.

Added value through

  • a safe solution in timber frame construction
  • the proven quality of KEIM mineral paints
  • high application safety
  • use of non-combustible insulating materials

Substrate

  • as external cladding, generally approved or standardised board materials by the building authorities, made of
    • solid wood (coniferous wood) grading class S10 or strength class C24 as well as
    • glued laminated timber according to DIN 1052
    • cross laminated timber with layers of solid wood S10/ C24
    • laminated beams with lamellas of solid wood S10/ C24 or panel materials according to DIN EN 13986 and DIN V2000-1 or general building approval. Approval
    • synthetic resin-bonded chipboard type P5 or P7 โ‰ฅ 650 kg/mยณ, thickness โ‰ฅ 16 mm
    • OSB boards type OSB/3 or OSB/4; โ‰ฅ600 kg/mยณ; โ‰ฅ 15 mm
    • cement-bonded particleboards ; โ‰ฅ1300 kg/mยณ; โ‰ฅ 16 mm
  • if necessary, special splash water protection in the plinth area
  • if necessary, proof of adhesive tensile strength โ‰ฅ 0.08N/mmยฒ
  • other substrates are approved for KEIM MW-Lamelle-S2 (041)

Approval and determination

  • flame retardant B1 according to DIN 4102-1 for insulation thicknesses up to 200 mm
  • use in accordance with the requirements of the state building regulations for the entire wall construction
  • KEIM approval Z-33.47-727

System overview

KEIM Klebespachtel

Organic cement-free adhesive filler for sticking EPS rigid foam boards to flat, slightly absorbent substrates such as board materials in timber construction.

Colour shade
white
Application
power stirrer, filler knife, trowel, notched trowel
Consumption
2,5 kg/mยฒ for gluing.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket25kg24

Coverrock X-2

Rock wool insulation boards in accordance with DIN EN 13162. For use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.

On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.

The rock wool insulation boards meet the increased requirements of the

Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.

 

Rated value of thermal conductivity: 0.035 W/mK

 

Other mineral wool insulation boards on request.

Colour shade
yellow-brown
Packaging
Panel thickness [mm]m² per bundlem² per palletBundle per palletDynamic stiffness s` [MN / m³]
801.5015.001011
1001.5012.00811
1201.509.0069
1401.008.0089
1601.008.0089
1801.006.0069
2001.006.0066

Coverrock II

Rock wool insulation boards according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.

On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.

The rock wool insulation boards meet the increased requirements of the

Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.

 

Rated value of thermal conductivity: 0.035 W/mK

 

Other mineral wool insulation boards on request.

Colour shade
yellow-brown
Packaging
Panel thickness [mm]m² per bundlem² per palletBundle per palletDynamic stiffness s` [MN / m³]
602.0020.001012
801.5015.00109
1001.5012.0088
1201.509.0067
1401.008.0085
1601.008.0085
1801.006.0065
2001.006.0065
220*0.505.00105
240*0.505.00105
260*0.504.0085
280*0.504.0085
300*0.504.0085
Packaging additional info
* Delivery time on request. KEIMFARBEN must be informed of the use in ETIC systems.

Speedrock II

Rock wool lamellas according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.

On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.

The rock wool insulation boards meet the increased requirements of the

Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.

 

Rated value of thermal conductivity: 0,041 W/mK

 

Other mineral wool lamellas on request.

Colour shade
yellow-brown
Packaging
Panel thickness [mm]m² per bundlem² per palletBundle per palletDynamic stiffness s` [MN / m³]
40*2.8828.8010
501.9223.0412120
601.9219.2010100
801.4414.4010100
1000.9611.5212100
1200.969.601080
1400.967.68880
1600.965.76680
1800.965.76670
2000.965.76670
2200.484.801070
2400.483.84870
2600.483.84870
2800.483.84870
3000.483.84870
Packaging additional info
* on request

ejotherm STR H A2

For statically relevant dowelling of insulation boards on wooden substrates according to Z-33.47-727. Recessed or surface-flush installation possible with suitable installation tool.

Colour shade
white
Plate diameter
60 mm
Packaging
Dowel length [mm]Panel thickness [mm]Pieces per unit
8040100
10060100
12080100
80140100
160120100
180140100
200160100
220180100
Packaging
Product namePanel thickness [mm]Type of containerPieces per unit
STR StopfenIncluded when ordering the dowel
STR-Rondelle EPSab 100 mmcarton100
STR-Rondelle EPS grauab 100 mmcarton100
STR-Rondelle MWab 100 mmcarton100
Dรผbelteller ejotherm VT 2Gab 100 mmcarton100
Ejotherm STR Rondelle-MWab 100 mmcarton100
Ejotherm STR Rondelle-EPS grauab 100 mmcarton100
Dรผbelteller ejotherm VT 90carton100
Dรผbelteller ejotherm SBL 140 Pluscarton100

ejotherm Dรผbelteller VT 2G

Recessed anchor installation in connection with ejotherm STR-U 2G, S1, STR H and STR H A2 from 100 mm insulation board thickness in all mineral wool insulation boards. Recessed setting and screwing in in one operation, to avoid dowel marks, sealing of the insulation material with STR-RondelleMW.

Colour shade
white
Plate diameter
mind. 90 mm
Packaging
Product namePanel thickness [mm]Plate diameterType of containerPieces per unit
Ejot Dรผbelteller VT 2Gab 100 mmmind. 110 mmcarton100
Ejot Dรผbelteller VT 9090 mmcarton100
Ejot Dรผbelteller SBL 140 Plus140 mmcarton100
Ejotherm STR Rondelle-MWab 100 mmcarton100
Ejotherm STR Rondelle-EPS grauab 100 mmcarton100

EJOT Dรผbelteller VT 90

Plastic anchor plate for ejot screw anchors for flush mounting of mineral wool insulation boards.

Colour shade
white
Plate diameter
90 mm
Packaging
Product namePanel thickness [mm]Plate diameterPieces per unit
Ejot Dรผbelteller VT 9090 mm100
Ejotherm STR-Stopfen500
Ejot Dรผbelteller SBL 140 Plus140 mm100
Ejot Dรผbelteller VT 2Gab 100 mmmind. 110 mm100

EJOT Dรผbelteller SBL 140 Plus

Plastic anchor plate for Ejot screw anchors for flush mounting of mineral wool lamellas.

Colour shade
white
Plate diameter
140 mm
Packaging
Product namePanel thickness [mm]Plate diameterType of containerPieces per unit
Ejot Dรผbelteller SBL 140 Plus140 mmcarton100
Ejotherm STR-Stopfencarton500
Ejot Dรผbelteller VT 9090 mmcarton100
Ejot Dรผbelteller VT 2Gab 100 mmmind. 110 mmcarton100

KEIM Armierungsmasse-100

Hydraulically setting mortar for bonding and reinforcing.

Medium to thick-layer reinforcement 4 - 15 mm in KEIM ETIC systems.

Colour shade
natural white
Application
power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
Consumption
1,1 kg/mยฒ per mm for reinforcement.
approx. 3,5 kg/mยฒ zum Kleben der Platten.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag20kg36

KEIM Glassfibre-Reinforcing-Mesh 6x6

Glassfiber Reinforceing Mesh 6x6 mm

Supplied in 55 sq. m rolls, this Glassfibre Reinforcing Mesh is ideal for use to reinforce the KEIM render systems such as Universal Render, Universal Render Fine and NHL Kalkputz.

Colour shade
grey
Consumption
1,1 mยฒ/mยฒ
Packaging Accessory
Product nameType of containerLength [m]m² per bundlem² per palletBundle per pallet
Glasfaser-Gittermatte 6x6roll50551,81533
Mesh width
6 x 6 mm

KEIM Stucasol

Ready-to-use sol-silicate plaster with unique binder concept for a particularly uniform appearance, even without additional coating.

Colour shade
White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
No monochrome shades available.
Application
power stirrer, feed pump, filler knife, trowel
Consumption
Scratch plaster structure:
K1 (1 mm) - approx. 1.5 kg/mยฒ
K1,5 (1.5 mm) - approx. 2.3 kg/mยฒ
K2 (2 mm) - approx. 3.0 kg/mยฒ
K3 (3 mm) - approx. 3.6 kg/mยฒ
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket25kg24

KEIM Brillantputz

High-quality, mineral, thin-layer, lightweight plaster based on white lime, white cement and high-grade marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.

Colour shade
White and colour shades exclusively with pure mineral lightfast pigments. No monochrome shades/full shades available.
Minimum order quantity of tinted material 150 kg.
Application
power stirrer, filler knife, trowel, rendering machine, feed pump
Consumption
Rough plaster 2 mm: approx. 2.2 kg/mยฒ
Rough plaster 3 mm: approx. 3.0 kg/mยฒ
Grooved plaster 2 mm: approx. 2.5 kg/mยฒ
Grooved plaster 3 mm: approx. 3.0 kg/mยฒ
Smooth plaster: approx. 3 - 4 kg/mยฒ applies for 3 mm layer thickness
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg30

KEIM Mineralputz

High-quality, mineral, thin-layer, lightweight plaster as rough plaster, grain size 5 mm on the basis of white lime, white cement and valuable marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.

Colour shade
natural white
Application
power stirrer, feed pump, filler knife, trowel, rendering machine
Consumption
5 kg/mยฒ
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg30

KEIM Soldalit

Universal, silicate-based facade paint with a sol-silicate binder (combination of silica sol and water glass) for organic, mineral and mixed substrates as well as ETICS. KEIM Soldalit is water-repellent, highly diffusible, lightfast, UV-stable and extremely weather-resistant with minimal soiling tendency. Organic content < 5%.

KEIM Soldalit is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโ„ข Gold.

Colour shade
White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
Monochrome shades 9001S-9012S available.
Application
block brush, roller, airless sprayer
Consumption
0,45 kg/mยฒ for two coatings.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket18kg32
bucket5kg70

KEIM Egalisationsfarbe

Single-layer levelling paint. KEIM Ausgleichsfarbe (equalising paint) is a silicate facade paint for levelling stains on coloured mineral renders, especially for levelling coloured, visually inhomogeneous finishing plasters and silicate plasters. KEIM Egalisationsfarbe is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโ„ข Gold.

Colour shade
White and colour shades.
Application
block brush, roller, airless sprayer
Consumption
0,20 L/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket15L24
bucket5L70
bucket2.5L80
Jump to the top of the page