KEIM Classic MW auf Plattenwerkstoffen
The KEIM Classic-MW thermal insulation composite system on board materials is non-combustible and sustainable.
Added value through
- a safe solution in timber frame construction
- the proven quality of KEIM mineral paints
- high application safety
- use of non-combustible insulating materials
Substrate
Panel materials generally approved or standardised by the building authorities as external cladding, made of
- solid wood (coniferous wood) grading class S10 or strength class C24 as well as
- glued laminated timber according to DIN 1052
- cross laminated timber with layers of solid wood S10/ C24
- laminated beams with lamellas of solid wood S10/ C24 or panel materials according to DIN EN 13986 and DIN V2000-1 or general building approval. Approval
- synthetic resin-bonded chipboard type P5 or P7 โฅ 650 kg/mยณ, thickness โฅ 16 mm
- OSB boards type OSB/3 or OSB/4; โฅ600 kg/mยณ; โฅ 15 mm
- cement-bonded particleboards ; โฅ1300 kg/mยณ; โฅ 16 mm
- if necessary, special splash water protection in the plinth area
- if necessary, proof of adhesive tensile strength โฅ 0.08N/mmยฒ
- for KEIM MW-Lamelle-S2 (041) other substrates are approved
Approval and determination
- flame retardant B1 according to DIN 4102-1 for insulation thicknesses up to 200 mm
- use in accordance with the requirements of the state building regulations for the entire wall construction
- KEIM approval Z-33.47-727
System overview
KEIM Klebespachtel
Organic cement-free adhesive filler for sticking EPS rigid foam boards to flat, slightly absorbent substrates such as board materials in timber construction.
- Colour shade
- white
- Application
- power stirrer, filler knife, trowel, notched trowel
- Consumption
- approx. 2,5 kg/mยฒ for gluing.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 25 kg 24
Coverrock X-2
Rock wool insulation boards in accordance with DIN EN 13162. For use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0.035 W/mK
Other mineral wool insulation boards on request.
- Colour shade
- yellow-brown
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 80 1.50 15.00 10 11 100 1.50 12.00 8 11 120 1.50 9.00 6 9 140 1.00 8.00 8 9 160 1.00 8.00 8 9 180 1.00 6.00 6 9 200 1.00 6.00 6 6
Coverrock II
Rock wool insulation boards according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0.035 W/mK
Other mineral wool insulation boards on request.
- Colour shade
- yellow-brown
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 60 2.00 20.00 10 12 80 1.50 15.00 10 9 100 1.50 12.00 8 8 120 1.50 9.00 6 7 140 1.00 8.00 8 5 160 1.00 8.00 8 5 180 1.00 6.00 6 5 200 1.00 6.00 6 5 220* 0.50 5.00 10 5 240* 0.50 5.00 10 5 260* 0.50 4.00 8 5 280* 0.50 4.00 8 5 300* 0.50 4.00 8 5 - Packaging additional info
- * Delivery time on request. KEIMFARBEN must be informed of the use in ETIC systems.
Speedrock II
Rock wool lamellas according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0,041 W/mK
Other mineral wool lamellas on request.
- Colour shade
- yellow-brown
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 40* 2.88 28.80 10 60 1.92 19.20 10 100 80 1.44 14.40 10 100 100 0.96 11.52 12 100 120 0.96 9.60 10 80 140 0.96 7.68 8 80 160 0.96 5.76 6 80 180 0.96 5.76 6 70 200 0.96 5.76 6 70 220 0.48 4.80 10 70 240 0.48 3.84 8 70 260 0.48 3.84 8 70 280 0.48 3.84 8 70 300 0.48 3.84 8 70 - Packaging additional info
- * on request
ejotherm STR H A2
For statically relevant dowelling of insulation boards on wooden substrates according to Z-33.47-727. Recessed or surface-flush installation possible with suitable installation tool.
- Colour shade
- white
- Plate diameter
- 60 mm
- Packaging
Dowel length [mm] Panel thickness [mm] Pieces per unit 80 40 100 100 60 100 120 80 100 80 140 100 160 120 100 180 140 100 200 160 100 220 180 100 - Packaging
Product name Panel thickness [mm] Type of container Pieces per unit STR Stopfen Included when ordering the dowel STR-Rondelle EPS ab 100 mm carton 100 STR-Rondelle EPS grau ab 100 mm carton 100 STR-Rondelle MW ab 100 mm carton 100 Dรผbelteller ejotherm VT 2G ab 100 mm carton 100 Ejotherm STR Rondelle-MW ab 100 mm carton 100 Ejotherm STR Rondelle-EPS grau ab 100 mm carton 100 Dรผbelteller ejotherm VT 90 carton 100 Dรผbelteller ejotherm SBL 140 Plus carton 100
ejotherm Dรผbelteller VT 2G
Recessed anchor installation in connection with ejotherm STR-U 2G, S1, STR H and STR H A2 from 100 mm insulation board thickness in all mineral wool insulation boards. Recessed setting and screwing in in one operation, to avoid dowel marks, sealing of the insulation material with STR-RondelleMW.
- Colour shade
- white
- Plate diameter
- mind. 90 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Type of container Pieces per unit Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm carton 100 Ejot Dรผbelteller VT 90 90 mm carton 100 Ejot Dรผbelteller SBL 140 Plus 140 mm carton 100 Ejotherm STR Rondelle-MW ab 100 mm carton 100 Ejotherm STR Rondelle-EPS grau ab 100 mm carton 100
EJOT Dรผbelteller VT 90
Plastic anchor plate for ejot screw anchors for flush mounting of mineral wool insulation boards.
- Colour shade
- white
- Plate diameter
- 90 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Pieces per unit Ejot Dรผbelteller VT 90 90 mm 100 Ejotherm STR-Stopfen 500 Ejot Dรผbelteller SBL 140 Plus 140 mm 100 Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm 100
EJOT Dรผbelteller SBL 140 Plus
Plastic anchor plate for Ejot screw anchors for flush mounting of mineral wool lamellas.
- Colour shade
- white
- Plate diameter
- 140 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Type of container Pieces per unit Ejot Dรผbelteller SBL 140 Plus 140 mm carton 100 Ejotherm STR-Stopfen carton 500 Ejot Dรผbelteller VT 90 90 mm carton 100 Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm carton 100
KEIM Pulverkleber-90
Hydraulically setting, powdery cement-based adhesive.
Adhesive and reinforcing compound for KEIM external thermal insulation composite systems.
- Colour shade
- natural white
- Application
- power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
- Consumption
- approx. 4โ5 kg/mยฒ as adhesive or reinforcement.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 36
KEIM Glassfibre-Reinforcing-Mesh 4x4
Glassfiber Reinforceing Mesh 4x4mm (Turado)
Supplied in 55 sq. m rolls, this Glassfibre Reinforcing Mesh is ideal for use to reinforce KEIM Turado.
- Colour shade
- grey
- Consumption
- approx. 1,1 mยฒ/mยฒ
- Packaging Accessory
Product name Type of container Length [m] m² per bundle m² per pallet Bundle per pallet Treillis d'Armature 4x4 roll 50 55 1,815 33 - Mesh width
- 4 x 4 mm
KEIM Stucasol
Ready-to-use sol-silicate plaster with unique binder concept for a particularly uniform appearance, even without additional coating.
- Colour shade
- White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
No monochrome shades available. - Application
- power stirrer, feed pump, filler knife, trowel
- Consumption
- Scratch plaster structure:
K1 (1 mm) - approx. 1.5 kg/mยฒ
K1,5 (1.5 mm) - approx. 2.3 kg/mยฒ
K2 (2 mm) - approx. 3.0 kg/mยฒ
K3 (3 mm) - approx. 3.6 kg/mยฒ - Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 25 kg 24
KEIM Brillantputz
High-quality, mineral, thin-layer, lightweight plaster based on white lime, white cement and high-grade marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.
- Colour shade
- White and colour shades exclusively with pure mineral lightfast pigments. No monochrome shades/full shades available.
Minimum order quantity of tinted material 150 kg. - Application
- power stirrer, filler knife, trowel, rendering machine, feed pump
- Consumption
- Rough plaster 2 mm: approx. 2.2 kg/mยฒ
Rough plaster 3 mm: approx. 3.0 kg/mยฒ
Grooved plaster 2 mm: approx. 2.5 kg/mยฒ
Grooved plaster 3 mm: approx. 3.0 kg/mยฒ
Smooth plaster: approx. 3 - 4 kg/mยฒ applies for 3 mm layer thickness - Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 30
KEIM Mineralputz
High-quality, mineral, thin-layer, lightweight plaster as rough plaster, grain size 5 mm on the basis of white lime, white cement and valuable marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.
- Colour shade
- natural white
- Application
- power stirrer, feed pump, filler knife, trowel, rendering machine
- Consumption
- approx. 5 kg/mยฒ
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 30
KEIM Soldalit
Universal, silicate-based facade paint with a sol-silicate binder (combination of silica sol and water glass) for organic, mineral and mixed substrates as well as ETICS. KEIM Soldalit is water-repellent, highly diffusible, lightfast, UV-stable and extremely weather-resistant with minimal soiling tendency. Organic content < 5%.
KEIM Soldalit is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโข Gold.
- Colour shade
- White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
Monochrome shades 9001S-9012S available. - Application
- block brush, roller, airless sprayer
- Consumption
- approx. 0,45 kg/mยฒ for two coatings.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 18 kg 32 bucket 5 kg 70
KEIM Egalisationsfarbe
Single-layer levelling paint. KEIM Ausgleichsfarbe (equalising paint) is a silicate facade paint for levelling stains on coloured mineral renders, especially for levelling coloured, visually inhomogeneous finishing plasters and silicate plasters. KEIM Egalisationsfarbe is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโข Gold.
- Colour shade
- White and colour shades.
- Application
- block brush, roller, airless sprayer
- Consumption
- approx. 0,20 L/mยฒ for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 15 L 24 bucket 5 L 70 bucket 2.5 L 80
