KEIM Reinforcement and mesh
Reinforcing mesh distributes stresses which occur in the render to avoid reaching critical levels, and makes a fundamental contribution to the permanent existence of the render system. Grid mats are usually embedded in the middle of a layer of reinforced mortar which is up to 4 mm thick; layers thicker than 4 mm house grid mats in their upper third. The reinforced mortar is applied to the insulation surface with a toothed trowel, the mesh is then embedded with an overlap of 10 cm and a thin layer of reinforced mortar is applied on top.
In order to form straight corners and edges, a mesh corner angle is used.
Products overview
KEIM Glassfibre-Reinforcing-Mesh 4x4
Glassfiber Reinforceing Mesh 4x4mm (Turado)
Supplied in 55 sq. m rolls, this Glassfibre Reinforcing Mesh is ideal for use to reinforce KEIM Turado.
- Colour shade
- grey
- Consumption
- approx. 1,1 mΒ²/mΒ²
- Mesh width
- 4 x 4 mm
KEIM Glassfibre-Reinforcing-Mesh 6x6
Glassfiber Reinforceing Mesh 6x6 mm
Supplied in 55 sq. m rolls, this Glassfibre Reinforcing Mesh is ideal for use to reinforce the KEIM render systems such as Universal Render, Universal Render Fine and NHL Kalkputz.
- Colour shade
- grey
- Consumption
- approx. 1,1 mΒ²/mΒ²
- Mesh width
- 6 x 6 mm
KEIM Gewebe-Eckwinkel Spezial
Corner angle made of glass fibre fabric reinforced with plastic, universally applicable for building edges in KEIM ETIC and room climate systems, as well as in base plaster on masonry.
- Colour shade
- grey
- Consumption
- approx. 1,1 m/m
- Packaging additional info
- Delivery in cartons
- Mesh width
- 4 x 4 mm
KEIM Gewebe-Eckwinkel Spezial
Corner bracket made of glass fibre fabric reinforced with plastic, especially for use in the AquaROYAL, Klassik-Plus or ceramic system.
- Colour shade
- grey
- Consumption
- approx. 1,1 m/m
- Packaging additional info
- Delivery in cartons
- Mesh width
- 6 x 6 mm
KEIM Gewebe-Eckwinkel-Plus
Corner angle with glass-fibre fabric, wide plastic legs and sturdy pull-off edge, for use in the AquaROYAL or Klassik-Plus system.
- Colour shade
- grey
- Consumption
- approx. 1,1 m/m
- Packaging additional info
- Delivery in cartons
- Mesh width
- 6 x 6 mm
KEIM Gewebe-Rolleneckwinkel
Fabric corner angle, roll material, not pre-bent, variable angle, with predefined leg lengths for forming internal corners that do not have a building component joint.
Required for internal corners in EPS systems to achieve flame resistance up to at least the top of the 3rd floor ceiling.
- Colour shade
- white
- Consumption
- approx. 1,1 m/m
- Packaging additional info
- Delivery in cartons
- Mesh width
- 4 x 4 mm
KEIM Diagonalarmierung
Prefabricated cuts of the glass fibre, mesh mat in the shape of an arrow for additional reinforcement in the corner area of building openings such as windows and doors.
- Colour shade
- grey
KEIM Sturzeckwinkel
Prefabricated angle for the execution of a combined diagonal and internal corner reinforcement (reveal/lintel) for facade openings in KEIM ETIC systems.
- Colour shade
- white
- Mesh width
- 4 x 4 mm
KEIM Panzergittermatte
System-related additional reinforcement fabric under the glass-fibre mesh mat to increase compressive strength and impact resistance, alkali-resistant, push-resistant.
- Colour shade
- white
- Consumption
- approx. 1,0 mΒ²/mΒ²
KEIM Gittermatte-K
System-associated lattice mat for attachment in the KEIM Keramik ETIC system.
- Colour shade
- white
- Consumption
- approx. 1,1 mΒ²/mΒ²
- Mesh width
- 6,5 x 7 mm
