Jump to the content of the page
Color tool Germany | EN
Profile and system supplements

KEIM Windowsills

Windowsills must meet optical and structural-engineering requirements. The rainproof connection to the ETIC systems and protection of the covered railing from dirt through sufficient protrusion should always be considered during planning. KEIM windowsills provide you with an ideal system solution.


Products overview

KEIM Fensterbank

Aluminium window sill with self-adhesive protective film

The dimensioning of the projection of the window sill usually results from the reveal depth (carcass) + system thickness + 40 mm projection.

 

Window sill length:

Lengths according to specification

β€’ with previous installation and use of the KEIM end cap, the length of the window sill is calculated from the finished dimension + 32 mm.

β€’ In case of subsequent installation and use of the KEIM clinker end cap, the length of the window sill is usually calculated from the finished clear dimension - 20 mm (or -5 mm for ceramic ETICS)

 

Other projections, moulded parts, surfaces, anodising and special colours on request.

Colour shade
naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
Packaging additional info
Other projections, shaped parts, surfaces, anodising and special colours on request.

KEIM Fensterbankschrauben weiß

Stainless steel window sill screws, fine thread with drill point, 3.9 x 25 mm, incl. cover caps in grey or white.

For secure fastening of the window sill and to ensure the thermal length change by means of pre-mounted washer made of high-quality plastic.

Further colours and variants on request.

Colour shade
white/grey
Consumption
approx. 3 StΓΌck/m

KEIM Parawet-MW

Prefabricated insulation wedge made of mineral wool with 5Β° slope, surface waterproof coating, integrated fabric flag and clear drip edge. For installation as a sill wedge under the KEIM window sill to form a second sealing level.

Colour shade
grey
Consumption
approx. 1,0 m/m
Packaging additional info
Other projections on request. Maximum order length 3000 mm.
Mesh width
4 x 4 mm

KEIM PVC-Slider

Moulded parts made of PVC. For easier installation of natural stone window sills in conjunction with a second sealing level.

Optionally also available as PVC-Slider-F, as spacer for window sills in connection with a second sealing level.

Colour shade
white
Packaging additional info
1 set consists of a pair (left and right stop).

Illbruck SP925 (Abdichtungsbeschichtung)

Einkomponentige, elastische und niedrigviskose Abdichtungsbeschichtung auf SMP-Polymerbasis. Zur wasserdichten und dauerelastischen Abdichtung der Anschlussfugen zwischen Fenster, Laibung und dem BrΓΌstungskeil KEIM Parawet-MW.

Colour shade
anthracite
Packaging additional info
Inkl. SpritzdΓΌse je Kartusche.

KEIM Klinkerendkappe natur eloxiert

Aluminium end cap, limited driving rain tightness, without expansion compensation of the window sill, for retrofitting window sills

Colour shade
naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
Packaging additional info
Other projections, shaped parts, surfaces, anodising and special colours on request.

KEIM Reveal-Top

Surface-finished soffit insulation board with cement-free finish plaster coating and fabric flag for the façade surface. For the rational insulation of soffits.

KEIM Reveal-Linto-Top-MW with an integrated drip edge is available for rational insulation in the lintel area.

Colour shade
white
Packaging additional info
Object-specific lengths can be ordered. Other thicknesses and projections on request.
Mesh width
4 x 4 mm

KEIM CFR-Connect 3D-Reveal

Connection profile as plastering and sealing strip without fabric, with integrated sealing flap made of TPE for three-dimensional movement absorption and plaster removal edge. Foldable protective flap for cover foil. For durable and driving rain-proof connection joints between the frame or door frame and the reveal panel KEIM Reveal-Top. The movements from the building component and the ETICS are absorbed.

Suitable for:

window and door reveals

Exterior

Further notes on application in the KEIM detailed plans.

Colour shade
white
Packaging additional info
nur in Verbindung mit Iso-Top Flexkleber HP

Iso-Top Flexkleber HP

One-component adhesive based on MS-polymer. For permanent and driving rain-proof bonding of the reveal insulation board KEIM Reveal-Top to the plastering strip KEIM CRF-Connect 3D-Reveal and the joint areas of the insulation wedge KEIM Parawet-MW as well as the connections to window frames (second sealing level).

Universally applicable for bonding materials made of plastics, PVC, metal, wood, plaster and insulation in exterior areas.

Colour shade
white
Consumption
for gluing.
Packaging additional info
*Schlauchbeutel inkl. 4 SpritzdΓΌsen.

KEIM Endkappe

Aluminium end cap, with integrated sealing shoe for the lateral, driving rain-tight termination of window sills, to ETIC systems, incl. expansion compensation on both sides for prior installation of the window sill.

Colour shade
naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
Packaging additional info
Other projections, shaped parts, surfaces, anodising and special colours on request.

KEIM Stoßverbinder natur eloxiert

Aluminium connector for covering two window sill elements, without expansion compensation and without sealing function (second sealing level is recommended).

 

Connector for external and internal corners 90Β° or 135Β° on request

Colour shade
naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
Packaging additional info
Further projections, moulded parts, surfaces, anodising and special colours on request.

KEIM Fensterbankhalter

For anchoring the underside of the window sill to the masonry during previous installation, sizes 1 to 8

Other sizes on request.

Colour shade
naturally anodized
Jump to the top of the page