KEIM Ceramic MW
Our KEIM Keramik ETIC system offers a wide range of design options.
Added value through
- valuable clinker optics
- combination of high-performance MW insulating material FKD-MAX C2
- high design flexibility e.g. combination facades
- high application safety
- free choice among manufacturers of suitable ceramics
Substrate
- solid masonry
- Concrete
- aerated concrete
- vertically perforated brick, in each case with and without plaster
- if necessary, proof of adhesive tensile strength โฅ 0.08 N/mm2
- If necessary, prime with KEIM Indulaqua
Approval and determination
- non-combustible A2 according to DIN 4102-1 for MW insulation materials
- up to approx. 100 m building height (observe state building regulations!)
- up to approx. 22 m building height (observe state building regulations!)
- KEIM approval Z-33.46-1187
System overview
KEIM Klebemรถrtel-K
Mineral adhesive and reinforcing mortar for KEIM ceramic EPS and KEIMceramic MW systems. Thin-layer reinforcement with approx. 3 - 5 mm layer thickness.
- Colour shade
- grey
- Application
- power stirrer, filler knife, trowel, notched trowel, rendering machine
- Consumption
- approx. 5 kg/mยฒ for gluing.
approx. 5,5 kg/mยฒ zum Armieren - Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
FKD-MAX C2
Rock wool insulation board according to DIN EN 13162, for use in a KEIM ceramic ETICS according to the provisions of approval Z-33.46-1187. Quality-controlled, non-combustible A1 according to EN 13501-1, dimensionally stable, coated on both sides.
Other applications in KEIM ETICS according to the provisions of the respective approvals alternatively possible.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0.035 W/mK
Other mineral wool insulation boards on request.
- Colour shade
- yellow-brown
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 60 1.92 19.2 10 13 80 1.44 14.40 10 11 100 0.96 11.52 12 8 120 0.96 9.60 10 7 140 0.96 7.68 8 6 160 0.96 5.76 6 5 180 0.96 5.76 6 5 200 0.96 5.76 6 4 220* 0.48 4.80 10 4 240* 0.48 4.80 10 3 260* 0.48 3.84 8 3 280* 0.48 3.84 8 3 300* 0.48 3.84 8 3 - Packaging additional info
- * Delivery time on request. KEIMFARBEN must be informed of the use in ETIC systems.
Speedrock II
Rock wool lamellas according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.
On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.
The rock wool insulation boards meet the increased requirements of the
Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.
Rated value of thermal conductivity: 0,041 W/mK
Other mineral wool lamellas on request.
- Colour shade
- yellow-brown
- Packaging
Panel thickness [mm] m² per bundle m² per pallet Bundle per pallet Dynamic stiffness s` [MN / m³] 40* 2.88 28.80 10 60 1.92 19.20 10 100 80 1.44 14.40 10 100 100 0.96 11.52 12 100 120 0.96 9.60 10 80 140 0.96 7.68 8 80 160 0.96 5.76 6 80 180 0.96 5.76 6 70 200 0.96 5.76 6 70 220 0.48 4.80 10 70 240 0.48 3.84 8 70 260 0.48 3.84 8 70 280 0.48 3.84 8 70 300 0.48 3.84 8 70 - Packaging additional info
- * on request
ejotherm STR U 2G
Universal screw anchor consisting of plastic anchor with plastic plate and pre-mounted metal screw, generally approved by the building authorities and European approved, ETA-04/0023, Z-21.2-1769, for recessed and flush mounting of insulation boards and fire bars in KEIM ETIC-Systems according to system approval.
- Colour shade
- white
- Plate diameter
- 60 mm
- Packaging
Dowel length [mm] Drill hole depth, recessed installation Drill hole depth, flush installation Panel thickness [mm] Pieces per unit 115 - 35 mm (75 mm)* 60 100 115 - 35 mm (75 mm)* 80 100 135 50 mm (90 mm)* 35 mm (75 mm)* 100 100 155 50 mm (90 mm)* 35 mm (75 mm)* 120 100 175 50 mm (90 mm)* 35 mm (75 mm)* 140 100 195 50 mm (90 mm)* 35 mm (75 mm)* 160 100 215 50 mm (90 mm)* 35 mm (75 mm)* 180 100 235 50 mm (90 mm)* 35 mm (75 mm)* 200 100 255 50 mm (90 mm)* 35 mm (75 mm)* 220 100 275 50 mm (90 mm)* 35 mm (75 mm)* 240 100 295 50 mm (90 mm)* 35 mm (75 mm)* 260 100 315 50 mm (90 mm)* 35 mm (75 mm)* 280 100 335 50 mm (90 mm)* 35 mm (75 mm)* 300 100 355 50 mm (90 mm)* 35 mm (75 mm)* 320 100 375 50 mm (90 mm)* 35 mm (75 mm)* 340 100 395 50 mm (90 mm)* 35 mm (75 mm)* 360 100 415 50 mm (90 mm)* 35 mm (75 mm)* 380 100 435 50 mm (90 mm)* 35 mm (75 mm)* 400 100 455 50 mm (90 mm)* 35 mm (75 mm)* 420 100 - Packaging additional info
- * Use category A, B, C, D, (E); standard values for new build substrates.
- Packaging
Product name Panel thickness [mm] Type of container Pieces per unit STR Stopfen carton 500 STR-Rondelle EPS ab 100 mm carton 100 STR-Rondelle EPS grau ab 100 mm carton 100 STR-Rondelle MW ab 100 mm carton 100 Dรผbelteller ejotherm VT 2G ab 100 mm carton 100 Dรผbelteller ejotherm VT 90 carton 100 Ejotherm STR Rondelle-MW ab 100 mm carton 100 Ejotherm STR Rondelle-EPS grau ab 100 mm carton 100 Dรผbelteller ejotherm SBL 140 Plus carton 100
EJOT Dรผbelteller VT 90
Plastic anchor plate for ejot screw anchors for flush mounting of mineral wool insulation boards.
- Colour shade
- white
- Plate diameter
- 90 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Pieces per unit Ejot Dรผbelteller VT 90 90 mm 100 Ejotherm STR-Stopfen 500 Ejot Dรผbelteller SBL 140 Plus 140 mm 100 Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm 100
EJOT Dรผbelteller SBL 140 Plus
Plastic anchor plate for Ejot screw anchors for flush mounting of mineral wool lamellas.
- Colour shade
- white
- Plate diameter
- 140 mm
- Packaging
Product name Panel thickness [mm] Plate diameter Type of container Pieces per unit Ejot Dรผbelteller SBL 140 Plus 140 mm carton 100 Ejotherm STR-Stopfen carton 500 Ejot Dรผbelteller VT 90 90 mm carton 100 Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm carton 100
KEIM Gittermatte-K
System-associated lattice mat for attachment in the KEIM Keramik ETIC system.
- Colour shade
- white
- Consumption
- approx. 1,1 mยฒ/mยฒ
- Packaging Accessory
Product name Type of container Length [m] m² per bundle m² per pallet Bundle per pallet Gittermatte-K roll 50 50 1,000 20 - Mesh width
- 6,5 x 7 mm
KEIM Verlegemรถrtel-K
Adhesive mortar for bonding brick slips or tiles, for use in the KEIM ceramic thermal insulation composite system in accordance with system approval Z-33.46-1187.
- Colour shade
- grey
- Application
- power stirrer, filler knife, notched trowel
- Consumption
- approx. 3,0 kg/mยฒ
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
KEIM Fugenmรถrtel-K
KEIM Fugenmรถrtel-K is a special, highly flexible cement mortar according to DIN EN 998-2: G, M 10 or DIN V 18580, NM III. For subsequent grouting of ceramic coverings in KEIM ETIC-Systems with ceramic surface. KEIM Fugenmรถrtel-K Is suitable for absorbent rough ceramic coverings and grouting with the grouting iron.
- Colour shade
- medium grey
- Application
- power stirrer, filler knife, sponge float
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
KEIM Fugenmรถrtel-KS
KEIM Fugenmรถrtel-KS is a special mortar according to DIN EN 998-2: G, M 10 or DIN V 18580, NM III. Special, highly flexible cement mortar for subsequent grouting of ceramic coverings in KEIM ETIC-Systems with ceramic surface. KEIM Fugenmรถrtel-KS is suitable for non-absorbent, smooth ceramic coverings using the slurry method.
- Colour shade
- medium grey
- Application
- power stirrer, filler knife, sponge float
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
Keramische Bekleidungen
Ceramic tiles or slabs according to DIN EN 14411, brick or clinker brick slips according to DIN V105-100 (DIN EN 771). For the visual design of durable surfaces in in accordance with . Can also be combined with high-performance MW insulation FKD-MAX C2 (WLG 035).
Suitable for ETICS (oberserve LRV โฅ 30)
We recommend the following manufacturers:
Rรถben Tonbaustoffe GmbH
www.roeben.com
Hagemeister GmbH & Co. KG
Klinkerwerk
www.hagemeister.de
Renowallยฎ
WDVS Systemtechnik GmbH
www.renowall.de
- Consumption
- The consumption specifications of the manufacturer of the ceramic cladding must be observed.
- Packaging additional info
- The delivery forms of the manufacturer of the ceramic cladding must be observed.
