KEIM Design-Glaze
For decorative coatings in glaze painting technique or to provide conventional coatings with a special finish.
Conquering lightness - transparent elegance with glazes
Glazes fascinate due to their exceedingly vibrant character: subtle shimmers or powerful radiance, on the facade or indoors, subtle simplicity or spectacular finesse β the immediacy of their effects captures the eyes.
KEIM design-glaze products
Ready-to-use glaze concentrate on sol-silicate basis in accordance with DIN EN1062-1 for interior and exterior use. For decorative glaze coatings and for finishing conventional top coats. Excellent for impressive colour designs and creative solutions. In combination with KEIM Design-Base and/or KEIM Design-Fixativ, KEIM Design-Lasur can be adjusted to the desired glaze effect as desired.
- Colour shade
- White and colour shades. Monochrome shades 9001L-9012L available. Monochrome shades 90018L-9020L available (only for interior use). Monochrome shades 1001L-1004L available (only for outside). For feasibility see colour tool at www.keim.com.
- Application
- roller, paint brush, paint brush, airless sprayer
- Consumption
- approx. 100 ml/mΒ² fertig eingestellte Mischung aus Design-Lasur und Design-Base..
For a single coat. - Packaging
Container content Unit of measure Quantity on pallet 15 l 24 5 l 70 1 l
Pigment-free glaze additive on sol-silicate basis for KEIM Design-Lasur. Serves as a thinner for KEIM Design-Lasur for glazing colour design indoors and outdoors. Allows transparent and mineral matt glaze coats with optimum application consistency, low settling behaviour and weather-resistant layer thicknesses.
- Colour shade
- raw white transparent, milky
- Application
- paint brush
- Consumption
- approx. 0,1 l/mΒ² for ready-to-use mixture of KEIM Design-Lasur with KEIM Design-Base and for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 15 l 24 bucket 5 l 70
Sol-silicate-based thinner and primer for KEIM Design-Lasur. Used for the pre-treatment of highly absorbent substrates and as a thinner for highly transparent glazes with KEIM Design-Lasur for interior and exterior use.
Especially recommended for glazes in the solid colour range and for highly transparent glazes.
- Colour shade
- milky
- Application
- paint brush
- Consumption
- approx. 0,05 l/mΒ² for ready-to-use mixture of KEIM Design-Lasur and KEIM Design-Fixativ
- Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 20 l 24 jerry can 5 l 96
