THE RIGHT PREPARATION FOR THE RIGHT SUBSTRATE.

Preparation is the key to achieving a good result. Substrates can have a too limited load-bearing capacity caused by environmental processes or mechanical influences. For successful specialists and a long-lasting facade result – remove coating obstacles with KEIM primers and consolidations.

OVERVIEW OF KEIM PRIMERS & SOLIDIFYING AGENTS

KEIM Silangrund (Silane-based primer)

Water-repellent, silane-based primer in alcoholic solution for mineral, porous, moisture-sensitive surfaces or surfaces exposed to severe water loads.

Colour shade
Colourless

Application
Brush, flooding

Consumption
Approx. 0.2 - 0.3 l/m2 (on concrete)
Approx. 0.4 - 0.6 l/m2 (on render)

Packaging
5 l and 25 l containers
Pallet: 8 x 25 l / 78 x 5 l

KEIM Silan-100

Solvent-free, silane-based water repellent to ZTV-ING OS-A.
KEIM Silan-100 is used to provide a water repellent finish on exterior mineral building materials, in particular on concrete. KEIM Silan-100 may in particular be used where structures are exposed to freeze/thaw cycles with deicing salts and to protect reinforcing steel from chloride corrosion due to salt penetration and as a priming coat prior to subsequent applications of KEIM Concretal-W, KEIM Concretal-Lasur or KEIM Concretal-C as additional water-proofing when exposed to severe weathering stress.

Colour shade
Colourless

Application
Brush, flooding with low-pressure spray gun

Consumption
0.17 - 0.2 l/m2

Packaging
5 l and 25 l containers
Pallet: 8 x 25 l / 78 x 5 l

KEIM I&F-Grund (Primer)

Primer with very good water vapour permeability to consolidate particularly difficult substrates that are susceptible to staining and bleeding.

Colour shade
Colourless

Application
Brush

Consumption
Approx. 0.1 l/m2

Packaging
2.5 l and 5 l container
Palett: 100 x 5 l

KEIM Blockweiß (Stain blocker)

White pigmented, aqueous primer with good water permeability and excellent insulating properties. For priming difficult interior substrates that are susceptible to staining or bleeding.

  • Highly insulating
  • Water vapour permeable
  • Aqueous
  • Pigmented, good hiding power

Colour shade
White

Application
Brush, roller

Consumption
Approx. 0.15 l/m2

Packaging
2.5 l and 12.5 l container
Pallet: 24 x 12.5 l

KEIM Isolierweiß (Sealer)

Two-component insulating agent on an aqueous base with excellent water vapour permeability. KEIM Isolierweiß is very compatible with silicate based interior paint systems. It is used as an intermediate sealer in case of bleedings (paper or wood dyestuffs) after the base coat, especially for gypsum plasterboard.

Colour shade
White

Application
Brush, roller

Consumption
Approx. 0.1 l/m2

Packaging
10 l container: 8 l + 2 x 1 l

KEIM Hydrophobin-2000

Water-dilutable, solvent-free, silane/siloxane-based primer concentrate. KEIM Hydrophobin-2000 serves as primer to equalise and reduce the absorbency and to strengthen porous, mineral substrates, and also, to provide it with a water-repellent.

Colour shade
Yellowish/reddish, clear

Application
Brush, flooding (wet-in-wet)

Consumption
0.02 l/m2 concentrate +
ca. 0.18 l/m2 water

Packaging
1 l container

KEIM Indulaqua

Aqueous, solvent-free, acrylic-hydrosol-based primer and firming agent. Ready-to-use primer for uncoated and absorbing concrete substrates and for uncoated, absorbing old renders. Especially before the application of an ETICS.

Application
Brush, roller, flooding

Consumption
0.10 – 0.25 l/m2

Packaging
5 l and 20 l containers
Pallet: 24 x 20 l / 96 x 5 l

KEIM Soliprim

Special silicate primer for interior use based on a binder combination of hydrosol and silica sol. Equalizing, substrate-solidifying, adhesion-promoting.

Packaging
5 l and 20 l containers
Pallet: 24 x 20 l / 96 x 5 l

KEIM Lotexan®

Colourless, hydrophobic, silane/siloxane-based final treatment. Suitable as water-repellent protective treatment for mineral renders and coatings.

Colour shade
Colourless

Application
Brush, spraying

Consumption
0.2 l - 0.8 l/m2

Packaging
5 l and 25 l containers
Pallet: 14 x 25 l

KEIM Lotexan®-N (Water repellent)

Colourless, hydrophobic, siloxane-based final treatment. Suitable as water-repellent protective treatment in particular for uncoated natural stone. All common kinds of natural stone, alkaline and neutral, can be protected from water, acid rain and atmospheric pollution. Penetrates deeply into the pores of the natural stone.

Colour shade
Colourless

Application
Brush, sprayer

Consumption
0.4 – 0.8 l/m2

Packaging
5 l and 25 l containers
Pallet: 14 x 25 l

This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
More details