KEIM Plinth Connection
The correct execution of an ETIC Systems plinth often requires special measures, e.g. with respect to protection against moisture. Special insulation panels are often needed. In such cases, separating the plinth from the ETIC Systems is recommended. The KEIM plinth-end profile guarantees a proper and aesthetically-attractive design and execution.
Products overview
KEIM Indulastic-P
Dispersion component for the production of an adhesive compound for base and perimeter insulation boards, as well as a mineral, paintable moisture protection.
Must be mixed 1:1 with cement (CEM I 32.5).
- Colour shade
- white
- Application
- power stirrer, filler knife, trowel
- Consumption
- approx. 4 kg/mΒ² as adhesive or reinforcement.
approx. 1 kg/mΒ² als Feuchteschutz - Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 18 kg 32
KEIM Bitucoll-2K
Two-component, plastic-modified, stable and fibre-reinforced bitumen compound with good adhesion on slightly damp and dry substrates. For bonding protective, drainage or insulation boards to sealed exterior basement walls and base surfaces. Also suitable as a damp-proofing coat at the base of unfinished buildings and as a crack-bridging thick coating for waterproofing buildings on normally absorbent substrates.
- Colour shade
- black
- Consumption
- approx. 2,2 kg/mΒ² for gluing.
approx. 5,8 kg/mΒ² gegen aufstauendes Sickerwasser - Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 22 kg bag 8 kg set 30 kg 18
KEIM PVC-Sockelgrundprofil
Base profile in combination with KEIM base insertion profile for creating thermal bridge-free connections between ETICS and base insulation.
- Colour shade
- white
- Consumption
- approx. 1,0 m/m
- Packaging additional info
- Delivery in cartons
KEIM PVC-Sockeleinsteckprofil
Plug-in profile with fixed fabric flag individually, or in combination with KEIM base profile for creating variable, thermal bridge-free connections between ETICS and base insulation.
- Colour shade
- white
- Consumption
- approx. 1,0 m/m
- Packaging additional info
- Delivery in cartons
- Mesh width
- 4 x 4 mm
KEIM Alu-Sockelprofilleiste
Aluminium base profile, with drip edge for all KEIM ETIC-Systems
- Colour shade
- naturally anodized
- Consumption
- approx. 1,0 m/m
- Packaging additional info
- Projection in 20 mm steps (from 222 mm 2-part).
KEIM KS-Aufsteckprofil
Special push-on profile made of high-quality plastic with welded-on fabric flag and plaster removal edge. For attaching to KEIM Alu-Sockelprofilleiste (base boards).
For thin-layered reinforcement with approx. 6 mm plaster thickness KS-Aufsteckprofil 6.
For thick-layered reinforcement with approx. 10 mm plaster thickness KS-Aufsteckprofil 10.
- Colour shade
- white
- Consumption
- approx. 1,1 m/m
- Packaging additional info
- Delivery in cartons
KEIM Sockelprofilverbinder
H-connector made of plastic. For connecting the horizontally mounted aluminium base boards.
- Colour shade
- light grey
KEIM DistanzstΓΌck
For levelling uneven substrates for aluminium base profile boards and PVC base board profiles.
The distance piece 10 mm serves as a spacer for subsequent installation of the window sill.
Thicknesses 3 mm, 5 mm, 8 mm, 10 mm, 15 mm
- Colour shade
- assorted colours
EJOT SchlagdΓΌbel ND K
Impact anchor with collar for fixing base profile boards and window sill holders.
For fixing KEIM TEC board to mineral substrates for substrate preparation.
Diameter 6 mm or 8 mm.
- Colour shade
- grey
- Packaging additional info
- * Suitable for fastening the KEIM TEC board to mineral substrates.
