Jump to the content of the page
Color tool Italy | EN
Complimentary products

Primers and solidifying agents

Carefully prepared substrate - a big step towards success. Preparation is the key to achieving a good result. Substrates can have a too limited load-bearing capacity caused by environmental processes or mechanical influences. For successful specialists and a long-lasting facade result โ€“ remove coating obstacles with KEIM primers and consolidations.


NOTE:  For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!

Products overview

KEIM Silan-Primer

Formerly KEIM Silangrund

Hydrophobic primer based on silane in alcoholic solution for use on heavily water-stressed or moisture-sensitive, mineral, porous building material surfaces.

Colour shade
colourless
Application
block brush, to flood
Consumption
approx. 0,2 - 0,8 L/mยฒ for application as primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can5L78

KEIM Silan-100

Solvent-free silane-based water repellent in accordance with ZTV-ING OS-A. Suitable for waterproofing mineral building materials, especially concrete. Suitable for hydrophobic treatment of mineral building materials, in particular concrete. Can be used especially in case of frost/de-icing salt exposure and to protect the reinforcement against chloride corrosion due to salt transport as well as a primer before painting with Concretal-W or Concretal-Lasur or Concretal-C, as additional water protection in case of increased weather exposure.

Application
block brush, to flood
Consumption
approx. 0,17 - 0,20 L/mยฒ for two coatings.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can5L78

KEIM Silex-OH

Clear solidifying agent based on silicic acid ester. Can be used on all porous mineral substrates. Especially for the reconsolidation of leached sandstone zones. Penetrates deep into the pores of the building material due to its very good creeping ability. The mineral gel precipitation causes good consolidation of the previously friable building material without impairing the water vapour permeability.

Colour shade
colourless
Application
block brush, to flood
Consumption
approx. 0,5 โ€“ 5 L/mยฒ
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister5L80

KEIM I-G-Primer

Primer with high water vapour permeability, for the consolidation of particularly difficult substrates prone to staining/bleeding.

Colour shade
colourless
Application
block brush
Consumption
0,2 l/mยฒ for two coatings.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister5l100

KEIM IF-Primer

Formerly KEIM I&F-Grund

Primer with high water vapour permeability, for the consolidation of particularly difficult substrates prone to staining/bleeding.

Colour shade
colourless
Application
block brush
Consumption
approx. 0,2 L/mยฒ for two coatings.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister5L100

KEIM Block-Primer

Former KEIM BlockweiรŸ

White pigmented, water-based priming paint with good water vapour permeability and high insulating effect. Used as a primer for difficult interior substrates that tend to stain/bleed through.

Colour shade
white
Application
block brush, roller
Consumption
approx. 0,15 L/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket12.5L24
can2.5L90

KEIM I-W-Primer

Water-based 2-component insulating agent with excellent water vapour permeability. Very well compatible with silicate-based interior paints. Serves as intermediate insulation in case of bleed-through of paper or wood paint after the base coat, especially on gypsum plasterboards.

Colour shade
white
Application
block brush, roller
Consumption
0,1 l/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measure
set10l

KEIM Indulaqua

Water-based, solvent-free primer and consolidating agent based on acrylic resin dispersion. Ready-to-use primer for unpainted, chipped and absorbent concrete substrates and for unpainted absorbent old plasters. Especially before applying an ETIC system.

Colour shade
milky
Application
block brush, to flood, roller
Consumption
approx. 0,2-0,4 L/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can10L60

KEIM Soliprim

Silicate special primer for interior use based on a binder combination of hydrosol and silica sol. Has a levelling, substrate-strengthening and adhesion-promoting effect.

Colour shade
milky
Application
block brush, roller, low-pressure sprayer
Consumption
approx. 0,15 L/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can20L24
jerry can5L96

KEIM Gel-Primer

Silicate-modified polymer primer for interior use with Pro-GEL technology. Intermediate Primer for intensive colour shades or under difficult lighting conditions (glancing light) on plasterboard and spot fillings to optimise the surface homogeneity of subsequent coats with KEIM interior paints. Gel-like consistency.

Colour shade
milky
Application
block brush, roller, airless sprayer
Consumption
approx. 0,1 L/mยฒ Application as intermediate primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket12.5L32
bucket5L70

KEIM Fixativ

Pure, liquid potassium silicate, without organic additives, primers and thinners. KEIM Fixativ is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโ„ข Gold.

Colour shade
clear, yellowish
Application
block brush
Consumption
approx. 0,1 L/mยฒ (and approx. 0.1 l/mยฒ water). for application as primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
tin can4L96
Jump to the top of the page