Jump to the content of the page
Shop United Kingdom | EN
Complimentary products

Primers and solidifying agents

Carefully prepared substrate - a big step towards success. Preparation is the key to achieving a good result. Substrates can have a too limited load-bearing capacity caused by environmental processes or mechanical influences. For successful specialists and a long-lasting facade result – remove coating obstacles with KEIM primers and consolidations.


Products overview

KEIM Silan-Primer

Hydrophobic primer based on silane in alcoholic solution for use on heavily water-stressed or moisture-sensitive, mineral, porous building material surfaces.

Colour shade
colourless
Application
block brush, to flood
Consumption
approx. 0,2 - 0,8 l/m² for application as primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can25l8
jerry can5l78

KEIM Silan-100

Solvent-free silane-based water repellent in accordance with ZTV-ING OS-A. Suitable for waterproofing mineral building materials, especially concrete. Suitable for hydrophobic treatment of mineral building materials, in particular concrete. Can be used especially in case of frost/de-icing salt exposure and to protect the reinforcement against chloride corrosion due to salt transport as well as a primer before painting with Concretal-W or Concretal-Lasur or Concretal-C, as additional water protection in case of increased weather exposure.

Application
block brush, to flood
Consumption
approx. 0,2-0,4 l/m² for two coatings.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can5l78

KEIM Silex-OH

Clear solidifying agent based on silicic acid ester. Can be used on all porous mineral substrates. Especially for the reconsolidation of leached sandstone zones. Penetrates deep into the pores of the building material due to its very good creeping ability. The mineral gel precipitation causes good consolidation of the previously friable building material without impairing the water vapour permeability.

Colour shade
colourless
Application
block brush, to flood
Consumption
approx. 0,5 – 5 l/m²
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister5l80

KEIM I-G-Primer

Primer with high water vapour permeability, for the consolidation of particularly difficult substrates prone to staining/bleeding.

Colour shade
colourless
Application
block brush
Consumption
approx. 0,2 l/m² for two coatings.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister5l100

KEIM Blockweiss

White pigmented, water-based priming paint with good water vapour permeability and high insulating effect. Used as a primer for difficult interior substrates that tend to stain/bleed through.

Colour shade
white
Application
block brush, roller
Consumption
approx. 0,15 l/m² for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket12.5l24
can2.5l90
Jump to the top of the page