Jump to the content of the page
Austria | EN
Complimentary products

Primers and solidifying agents

Carefully prepared substrate - a big step towards success. Preparation is the key to achieving a good result. Substrates can have a too limited load-bearing capacity caused by environmental processes or mechanical influences. For successful specialists and a long-lasting facade result – remove coating obstacles with KEIM primers and consolidations.


Products overview

KEIM Silangrund

Hydrophobic primer based on silane in alcoholic solution for use on heavily water-stressed or moisture-sensitive, mineral, porous building material surfaces.

Colour shade
colourless
Application
paint brush, to flood
Consumption
approx. 0,2 - 0,8 l/mΒ² for application as primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can25l8
jerry can5l78
KEIM Silan-100

Solvent-free silane-based water repellent in accordance with ZTV-ING OS-A. Suitable for waterproofing mineral building materials, especially concrete. Suitable for hydrophobic treatment of mineral building materials, in particular concrete. Can be used especially in case of frost/de-icing salt exposure and to protect the reinforcement against chloride corrosion due to salt transport as well as a primer before painting with Concretal-W or Concretal-Lasur or Concretal-C, as additional water protection in case of increased weather exposure.

Application
paint brush, to flood
Consumption
approx. 0,17 - 0,20 l/mΒ² for a single coating.
KEIM Silex-OH

Clear solidifying agent based on silicic acid ester. Can be used on all porous mineral substrates. Especially for the reconsolidation of leached sandstone zones. Penetrates deep into the pores of the building material due to its very good creeping ability. The mineral gel precipitation causes good consolidation of the previously friable building material without impairing the water vapour permeability.

Colour shade
colourless
Application
paint brush, to flood
Consumption
approx. 0,5 – 5 l/mΒ²
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister25l14
metal canister5l80
KEIM Silex-OH-100

Clear solidifying agent based on solvent-free silicic acid esters. Can be used on all porous mineral substrates. Especially for the reconsolidation of leached sandstone zones. Penetrates deep into the pores of the building material due to its very good creeping ability. Due to the mineral gel deposition, a good consolidation of the previously friable building material is achieved without impairing the water vapour permeability. (100% active ingredient content)

Colour shade
colourless
Application
paint brush, to flood
Consumption
approx. 0,5-5 l/mΒ²
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister5l80
KEIM I&F-Grund

Primer with high water vapour permeability, for the consolidation of particularly difficult substrates prone to staining/bleeding.

Colour shade
colourless
Application
paint brush
Consumption
approx. 0,2 l/mΒ² for two coatings.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
metal canister5l100
KEIM Blockweiss

White pigmented, water-based priming paint with good water vapour permeability and high insulating effect. Used as a primer for difficult interior substrates that tend to stain/bleed through.

Colour shade
white
Application
paint brush, roller
Consumption
approx. 0,15 l/mΒ² for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket12.5l24
can2.5l90
KEIM Isolierweiss

Water-based 2-component insulating agent with excellent water vapour permeability. Very well compatible with silicate-based interior paints. Serves as intermediate insulation in case of bleed-through of paper or wood paint after the base coat, especially on gypsum plasterboards.

Colour shade
white
Application
paint brush, roller
Consumption
approx. 0,1 l/mΒ² for a single coating.
Packaging
Type of containerContainer contentUnit of measure
set10l
KEIM CS-Primer

Silicate primer for priming KEIM Mycal-CS boards. KEIM CS-Primer regulates the absorbency of the board and prevents burning.

Colour shade
milky
Application
paint brush, airless sprayer
Consumption
approx. 0,15 l/mΒ² for application as primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can5l96
KEIM Indulaqua

Water-based, solvent-free primer and consolidating agent based on acrylic resin dispersion. Ready-to-use primer for unpainted, chipped and absorbent concrete substrates and for unpainted absorbent old plasters. Especially before applying an ETIC system.

Colour shade
milky
Application
paint brush, to flood, roller
Consumption
approx. 0,2-0,4 l/mΒ² for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can10l60
KEIM Soliprim

Silicate special primer for interior use based on a binder combination of hydrosol and silica sol. Has a levelling, substrate-strengthening and adhesion-promoting effect.

Colour shade
milky
Application
paint brush, roller, low-pressure sprayer
Consumption
approx. 0,15 l/mΒ² for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can20l24
jerry can5l96
KEIM Gel-Primer

Silicate-modified polymer primer for interior use with Pro-GEL technology. Primer for intensive colour shades or under difficult lighting conditions (glancing light) on plasterboard and spot fillings to optimise the surface homogeneity of subsequent coats with KEIM interior paints. Gel-like consistency.

Colour shade
milky
Application
paint brush, roller, airless sprayer
Consumption
approx. 0,1 l/mΒ² for application as primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket12.5l32
bucket5l70
Jump to the top of the page