KEIM Windowsills
Windowsills must meet the optical and structural-engineering requirements. The rainproof connection to the ETIC systems and protecting the covered railing against dirt through sufficient protrusion should always be considered during the planning. KEIM windowsills provide you with an ideally suited system solution.
Products overview
KEIM Fensterbank
Anodised, powder-coated or painted aluminium exterior window sill with extensive accessories. As a covering for masonry and/or insulation, mainly at window openings (for mounting on the lower frame).
The dimensioning of the projection of the window sill usually results from the reveal depth (carcass) + system thickness + 40 mm projection.
Window sill length: Lengths according to specification
β’ with previous installation and use of the KEIM end cap, the length of the window sill is calculated from the finished dimension + 32 mm.
β’ In case of subsequent installation and use of the KEIM clinker end cap, the length of the window sill is usually calculated from the finished clear dimension - 20 mm (or - 5 mm for ceramic ETICS).
- Colour shade
- naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
- Packaging additional info
- Other projections, shaped parts, surfaces, anodising and special colours on request.
KEIM Endkappe
Aluminium end cap, with integrated sealing shoe for the lateral, driving rain-tight termination of window sills, to ETIC systems, incl. expansion compensation on both sides for prior installation of the window sill.
- Colour shade
- naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
- Packaging additional info
- Other projections, shaped parts, surfaces, anodising and special colours on request.
KEIM Klinkerendkappe natur eloxiert
Anodised, powder-coated or painted aluminium clinker end cap. For retrofitting window sills.
- Colour shade
- naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
- Packaging additional info
- Other projections, shaped parts, surfaces, anodising and special colours on request.
KEIM Fensterbankhalter
Aluminium window sill bracket, sizes 1 to 8. For anchoring the window sill to the underside of the masonry during previous installation.
- Colour shade
- naturally anodized
KEIM Fensterbankschrauben weiΓ
Stainless steel window sill screws, fine thread with drill point, 3.9 x 25 mm, incl. cover caps. For secure fastening of the window sill and to ensure the thermal length change by means of pre-mounted washer made of high-quality plastic.
Further colours and variants on request.
- Colour shade
- white/grey
- Consumption
- approx. 3 StΓΌck/m
KEIM StoΓverbinder
- Colour shade
- naturally anodized, white (RAL 9016) and anthracite (RAL 7016), other RAL shades on request
- Packaging additional info
- Further projections, moulded parts, surfaces, anodising and special colours on request.