PRESERVE CONCRETE CHARACTER - MATT MINERAL FINISH
KEIM CONCRETAL®-LASUR: DESIGN AND CONSERVE THE FAIR-FACED CONCRETE SURFACES
Fair-faced concrete - one of the largest challenges in structural engineering and an important element in architecture. As the element that bears the load and gives an element its shape, the concrete is a part of the design and has a specific architectural effect on the structure. In each phase of the structural work being carried out, whether directly after the stripping of the concrete surfaces, or after decades of being exposed to the elements, the type and way the surface treatment is carried out determines the character.
In contrast to systems that have been heavily modified with plastics, mineral coatings from KEIM, from colourwashes to opaque, accentuate the character of the concrete. KEIM Concretal-Lasur retains concrete surfaces, whilst at the same time protecting it for a very long time.
When it depends on the concrete – KEIM Concretal-Lasur (Glaze).
Overview of KEIM Concretal®-Lasur System Products
KEIM Concretal®-Lasur
Sol-silicate one-component paint for translucent or opaque thin layer coatings. Especially economical, preventive concrete protection. Dilutions are possible in any ratio with Concretal-Base or Concretal-Fixativ to perform a translucent finish or to equalise visual shortcomings.
Protection grade: Weathering
Colour shade
White, concrete grey in several shades (e.g. colour shade 9526), KEIM Palette exclusiv
Application
Brush, roller
Consumption
For two opaque coats:
approx. 0.25 l/m² Concretal-Lasur
and 0.04 l KEIM Concretal-Fixativ
Packaging
1 l, 5 l and 15 l container
Pallet: 24 x 15 l / 70 x 5 l
KEIM Concretal®-Base (Pigment-free additive)
Sol-silicate based pigment-free additive for Concretal-Lasur. The desired degree of transparency is achieved by adding the corresponding quantity of Concretal-Base to Concretal-Lasur.
KEIM Concretal-Base allows mineral matt, low-pigment finishes together with ideal application consistency, reduced settling and weather-resistant layer thicknesses.
Colour shade
Colourless
Application
Brush, roller
Consumption
For one low-pigment coat:
approx. 0.08 – 0.15 l/m² prepared Lasur mix of Concretal-Lasur and Concretal-Base
Packaging
5 l and 15 l container
Pallet: 24 x 15 l / 70 x 5 l

Download
KEIM Concretal®-Fixativ (Dilution)
Dilution for Concretal-W, Concretal-W-Grob, Concretal-Lasur and KEIM Contact-Plus
Colour shade
Colourless
Consumption
For two opaque coats: approx. 0.25 l/m² Concretal-Lasur + 0.04 l KEIM Concretal-Fixativ
Packaging
5 l and 20 l containers
Pallet: 24 x 20 l / 96 x 5 l

Download
KEIM Concretal®-Base-AP
Sol-silicate based pigment-free additive for Concretal-Lasur-AP. The desired degree of transparency is achieved by adding the corresponding quantity of Concretal-Base-AP to Concretal-Lasur-AP.
KEIM Concretal-Base-AP allows mineral matt, low-pigment finishes together with ideal application consistency, reduced settling and weather-resistant layer thicknesses.
Variant Concretal®-Base-AP is particularly formulated to be used under tropical or subtropical climatic conditions.
Please note: This product may not be available in certain areas!
Colour shade
Colourless
Application
Brush, roller
Consumption
For one low-pigment coat:
approx. 0.08 – 0.15 l/m² prepared Lasur mix of Concretal-Lasur-AP and Concretal-Base-AP
Packaging
5 l and 15 l container
Pallet: 24 x 15 l / 70 x 5 l

Download
KEIM Concretal®-Lasur AP
Sol-silicate one-component paint for translucent or opaque thin layer coatings. Especially economical, preventive concrete protection. Dilutions are possible in any ratio with Concretal-Base-AP or Concretal-Fixativ to perform a translucent finish or to equalise visual shortcomings.
Variant Concretal-Lasur-AP is particularly formulated to be used under tropical or subtropical climatic conditions.
Please note: This product may not be available in certain areas!
Protection grade: Weathering
Colour shade
White, concrete grey in several shades (e.g. colour shade 9526), KEIM Palette exclusiv
Application
Brush, roller
Consumption
For two opaque coats:
approx. 0.25 l/m² Concretal-Lasur-AP
and 0.04 l KEIM Concretal-Fixativ
Packaging
1 l, 5 l and 15 l container
Pallet: 24 x 15 l / 70 x 5 l

Download