Jump to the content of the page
Spain | EN
Concrete systems

KEIM Concretal-Lasur: Design and Conserve

KEIM Concretal-Lasur is the first choice to preserve and design fair faced concrete with a mineral matt finish.

KEIM Concretal-Lasur accentuates the character of concrete

Fair-faced concrete - one of the largest challenges in structural engineering and an important element in architecture. As the element that bears the load and gives an element its shape, concrete is a key part of the design and has a specific architectural effect on the structure. In each phase of the structural work being carried out, whether directly after the stripping of the concrete surfaces, or after decades of being exposed to the elements, the type and way the surface treatment is carried out determines its character.

In contrast to systems that have been heavily modified with plastics, mineral coatings from KEIM, from colourwashes to opaque finishes, accentuate the character of the concrete. KEIM Concretal-Lasur retains the look and feel of concrete surfaces, whilst at the same time protecting it for a very long time.

Advantages of KEIM Concretal-Lasur

  • Perfect levelling of uneven-looking exposed concrete surfaces
  • Extremely fast re-drying due to extremely low sd(H2O) value
  • Strengthening of the concrete surface, high weathering protection
  • Absolutely lightfast due to pure mineral pigments (Fb-Code A1)
  • Minimal soiling due to antistatic and non-thermoplastic binder
  • Preservation of the original concrete aesthetics by means of mineral matt surface

KEIM Concretal-Lasur system products

KEIM Concretal-Lasur

Sol-silicate based one-component paint for glazing or covering thin coats. Particularly economical, preventive concrete protection. For glazing design applications or to compensate for visual defects, thinning with KEIM Concretal-Base or KEIM Concretal-Fixativ in any ratio is possible. KEIM Concretal-Lasur is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโ„ข Gold.

Protection principle: Weathering protection

Colour shade
White and colour shades.
Application
block brush, roller, airless sprayer
Consumption
For two opaque coats: approx. 0.25 l/mยฒ KEIM Concretal-Lasur and approx. 0.04 l/mยฒ KEIM Concretal-Fixativ
For two coats of translucent paint: depending on degree of dilution, must be determined by trial coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket15L24
bucket5L70

KEIM Concretal-Base

Pigment-free glaze additive on sol-silicate basis for KEIM Concretal-Lasur. The desired glaze effect can be achieved by adding the appropriate quantity KEIM Concretal-Base to KEIM Concretal-Lasur. Allows mineral matt glaze coats with optimum application consistency, low settling behaviour and weather-stable layer thicknesses. KEIM Concretal-Base is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโ„ข Gold.

Colour shade
raw white transparent, milky
Application
block brush, roller, airless sprayer
Consumption
Je nach Mischungsverhรคltnis und pro Anstrich: ca. 0,08 - 0,15 l/mยฒ fertig eingestellte Mischung aus Concretal-Lasur und Concretal-Base.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket15L24
bucket5L70

KEIM Concretal-Fixativ

Thinner for KEIM Concretal-Lasur, KEIM Concretal-W, KEIM Concretal-W-Grob, KEIM Concretal-Black and KEIM Contact-Plus. KEIM Concretal-Fixativ is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโ„ข Gold.

Colour shade
milky
Application
block brush
Consumption
approx. 0,15 L/mยฒ for application as primer.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can20L24
jerry can5L96
Jump to the top of the page