KEIM Classic MW auf Plattenwerkstoffen
The KEIM Classic-MW thermal insulation composite system on board materials is non-combustible and sustainable.
Added value through
- a safe solution in timber frame construction
- the proven quality of KEIM mineral paints
- high application safety
- use of non-combustible insulating materials
Substrate
Panel materials generally approved or standardised by the building authorities as external cladding, made of
- solid wood (coniferous wood) grading class S10 or strength class C24 as well as
- glued laminated timber according to DIN 1052
- cross laminated timber with layers of solid wood S10/ C24
- laminated beams with lamellas of solid wood S10/ C24 or panel materials according to DIN EN 13986 and DIN V2000-1 or general building approval. Approval
- synthetic resin-bonded chipboard type P5 or P7 โฅ 650 kg/mยณ, thickness โฅ 16 mm
- OSB boards type OSB/3 or OSB/4; โฅ600 kg/mยณ; โฅ 15 mm
- cement-bonded particleboards ; โฅ1300 kg/mยณ; โฅ 16 mm
- if necessary, special splash water protection in the plinth area
- if necessary, proof of adhesive tensile strength โฅ 0.08N/mmยฒ
- for KEIM MW-Lamelle-S2 (041) other substrates are approved
Approval and determination
- flame retardant B1 according to DIN 4102-1 for insulation thicknesses up to 200 mm
- use in accordance with the requirements of the state building regulations for the entire wall construction
- KEIM approval Z-33.47-727
System overview
KEIM Klebespachtel
Organic cement-free adhesive filler for sticking EPS rigid foam boards to flat, slightly absorbent substrates such as board materials in timber construction.
- Colour shade
- white
- Application
- power stirrer, filler knife, trowel, notched trowel
- Consumption
- approx. 2,5 kg/mยฒ for gluing.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 25 kg 24
ejotherm STR H A2
For statically relevant dowelling of insulation boards on wooden substrates according to Z-33.47-727. Recessed or surface-flush installation possible with suitable installation tool.
- Colour shade
- white
- Packaging
Product name Panel thickness [mm] Type of container Pieces per unit STR Stopfen Included when ordering the dowel STR-Rondelle EPS ab 100 mm carton 100 STR-Rondelle EPS grau ab 100 mm carton 100 STR-Rondelle MW ab 100 mm carton 100 Dรผbelteller ejotherm VT 2G ab 100 mm carton 100 Ejotherm STR Rondelle-MW ab 100 mm carton 100 Ejotherm STR Rondelle-EPS grau ab 100 mm carton 100 Dรผbelteller ejotherm VT 90 carton 100 Dรผbelteller ejotherm SBL 140 Plus carton 100 - Plate diameter
- 60 mm
ejotherm Dรผbelteller VT 2G
Recessed anchor installation in connection with ejotherm STR-U 2G, S1, STR H and STR H A2 from 100 mm insulation board thickness in all mineral wool insulation boards. Recessed setting and screwing in in one operation, to avoid dowel marks, sealing of the insulation material with STR-RondelleMW.
- Colour shade
- white
- Packaging
Product name Panel thickness [mm] Plate diameter Type of container Pieces per unit Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm carton 100 Ejot Dรผbelteller VT 90 90 mm carton 100 Ejot Dรผbelteller SBL 140 Plus 140 mm carton 100 Ejotherm STR Rondelle-MW ab 100 mm carton 100 Ejotherm STR Rondelle-EPS grau ab 100 mm carton 100 - Plate diameter
- mind. 90 mm
EJOT Dรผbelteller VT 90
Plastic anchor plate for ejot screw anchors for flush mounting of mineral wool insulation boards.
- Colour shade
- white
- Packaging
Product name Panel thickness [mm] Plate diameter Pieces per unit Ejot Dรผbelteller VT 90 90 mm 100 Ejotherm STR-Stopfen 500 Ejot Dรผbelteller SBL 140 Plus 140 mm 100 Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm 100 - Plate diameter
- 90 mm
EJOT Dรผbelteller SBL 140 Plus
Plastic anchor plate for Ejot screw anchors for flush mounting of mineral wool lamellas.
- Colour shade
- white
- Packaging
Product name Panel thickness [mm] Plate diameter Type of container Pieces per unit Ejot Dรผbelteller SBL 140 Plus 140 mm carton 100 Ejotherm STR-Stopfen carton 500 Ejot Dรผbelteller VT 90 90 mm carton 100 Ejot Dรผbelteller VT 2G ab 100 mm mind. 110 mm carton 100 - Plate diameter
- 140 mm
KEIM Pulverkleber-90
Hydraulically setting, powdery cement-based adhesive.
Adhesive and reinforcing compound for KEIM external thermal insulation composite systems.
- Colour shade
- grey
- Application
- power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
- Consumption
- approx. 4-5 kg/mยฒ as adhesive or reinforcement.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 36
KEIM Glassfibre-Reinforcing-Mesh 4x4
System-associated glass-fibre mesh mat for reinforcement in KEIM external thermal insulation composite systems, room climate systems and for reworking plaster cracks.
Slide-resistant and alkali-resistant.
- Colour shade
- grey
- Consumption
- approx. 1,1 mยฒ/mยฒ
- Mesh width
- 4 x 4 mm
KEIM Stucasol
Ready-to-use sol-silicate plaster with unique binder concept for a particularly uniform appearance, even without additional coating.
- Colour shade
- White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
No monochrome shades available. For feasibility see colour tool at www.keim.com. - Application
- power stirrer, feed pump, filler knife, trowel
- Consumption
- Scratch plaster structure:
K1 (1 mm) - approx. 1.5 kg/mยฒ
K1,5 (1.5 mm) - approx. 2.3 kg/mยฒ
K2 (2 mm) - approx. 3.0 kg/mยฒ
K3 (3 mm) - approx. 3.6 kg/mยฒ - Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 25 kg 24
KEIM Brillantputz
High-quality, mineral, thin-layer, lightweight plaster based on white lime, white cement and high-grade marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.
- Colour shade
- White and colour shades exclusively with pure mineral lightfast pigments. No monochrome shades/full shades available.
Minimum order quantity of tinted material 150 kg. - Application
- power stirrer, filler knife, trowel, rendering machine, feed pump
- Consumption
- Rough plaster 2 mm: approx. 2.2 kg/mยฒ
Rough plaster 3 mm: approx. 3.0 kg/mยฒ
Grooved plaster 2 mm: approx. 2.5 kg/mยฒ
Grooved plaster 3 mm: approx. 3.0 kg/mยฒ
Smooth plaster: approx. 3 - 4 kg/mยฒ applies for 3 mm layer thickness - Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 30
KEIM Mineralputz
High-quality, mineral, thin-layer, lightweight plaster as rough plaster, grain size 5 mm on the basis of white lime, white cement and valuable marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.
- Colour shade
- natural white
- Application
- power stirrer, feed pump, filler knife, trowel, rendering machine
- Consumption
- approx. 5 kg/mยฒ
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 30
KEIM Soldalit
Universal, silicate-based facade paint with a sol-silicate binder (combination of silica sol and water glass) for organic, mineral and mixed substrates as well as ETICS. KEIM Soldalit is water-repellent, highly diffusible, lightfast, UV-stable and extremely weather-resistant with minimal soiling tendency. Organic content < 5%.
Officially recommended by Sentinel-Haus-Institut!
- Colour shade
- White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
Monochrome shades 9001S-9012S available. For feasibility see colour tool at www.keim.com. - Application
- paint brush, roller, airless sprayer
- Consumption
- approx. 0,45 kg/mยฒ for two coatings.
- Packaging
KEIM Egalisationsfarbe
Single-layer levelling paint. KEIM Ausgleichsfarbe (equalising paint) is a silicate facade paint for levelling stains on coloured mineral renders, especially for levelling coloured, visually inhomogeneous finishing plasters and silicate plasters.
- Colour shade
- White and colour shades. For feasibility see colour tool at www.keim.com.
- Application
- paint brush, roller, airless sprayer
- Consumption
- approx. 0,20 l/mยฒ for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 15 l 24 bucket 5 l 70 bucket 2.5 l 80
