Jump to the content of the page
Switzerland | EN

KEIM Classic-Plus MW auf Plattenwerkstoffen

The thermal insulation composite system KEIM Klassik-Plus-MW on board materials is non-combustible, thick-layered, woodpecker-proof, sustainable and versatile in surface on request on some board materials.

Added value through

  • a safe solution in timber frame construction
  • the proven quality of KEIM mineral paints
  • high application safety
  • use of non-combustible insulating materials

Substrate

  • as external cladding, generally approved or standardised board materials by the building authorities, made of
    • solid wood (coniferous wood) grading class S10 or strength class C24 as well as
    • glued laminated timber according to DIN 1052
    • cross laminated timber with layers of solid wood S10/ C24
    • laminated beams with lamellas of solid wood S10/ C24 or panel materials according to DIN EN 13986 and DIN V2000-1 or general building approval. Approval
    • synthetic resin-bonded chipboard type P5 or P7 โ‰ฅ 650 kg/mยณ, thickness โ‰ฅ 16 mm
    • OSB boards type OSB/3 or OSB/4; โ‰ฅ600 kg/mยณ; โ‰ฅ 15 mm
    • cement-bonded particleboards ; โ‰ฅ1300 kg/mยณ; โ‰ฅ 16 mm
  • if necessary, special splash water protection in the plinth area
  • if necessary, proof of adhesive tensile strength โ‰ฅ 0.08N/mmยฒ
  • other substrates are approved for KEIM MW-Lamelle-S2 (041)

Approval and determination

  • flame retardant B1 according to DIN 4102-1 for insulation thicknesses up to 200 mm
  • use in accordance with the requirements of the state building regulations for the entire wall construction
  • KEIM approval Z-33.47-727

System overview

KEIM Klebespachtel

Organic cement-free adhesive filler for sticking EPS rigid foam boards to flat, slightly absorbent substrates such as board materials in timber construction.

Colour shade
white
Application
power stirrer, filler knife, trowel, notched trowel
Consumption
approx. 2,5 kg/mยฒ for gluing.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket25kg24

ejotherm STR H A2

For statically relevant dowelling of insulation boards on wooden substrates according to Z-33.47-727. Recessed or surface-flush installation possible with suitable installation tool.

Colour shade
white
Packaging
Product namePanel thickness [mm]Type of containerPieces per unit
STR StopfenIncluded when ordering the dowel
STR-Rondelle EPSab 100 mmcarton100
STR-Rondelle EPS grauab 100 mmcarton100
STR-Rondelle MWab 100 mmcarton100
Dรผbelteller ejotherm VT 2Gab 100 mmcarton100
Ejotherm STR Rondelle-MWab 100 mmcarton100
Ejotherm STR Rondelle-EPS grauab 100 mmcarton100
Dรผbelteller ejotherm VT 90carton100
Dรผbelteller ejotherm SBL 140 Pluscarton100
Plate diameter
60 mm

ejotherm Dรผbelteller VT 2G

Recessed anchor installation in connection with ejotherm STR-U 2G, S1, STR H and STR H A2 from 100 mm insulation board thickness in all mineral wool insulation boards. Recessed setting and screwing in in one operation, to avoid dowel marks, sealing of the insulation material with STR-RondelleMW.

Colour shade
white
Packaging
Product namePanel thickness [mm]Plate diameterType of containerPieces per unit
Ejot Dรผbelteller VT 2Gab 100 mmmind. 110 mmcarton100
Ejot Dรผbelteller VT 9090 mmcarton100
Ejot Dรผbelteller SBL 140 Plus140 mmcarton100
Ejotherm STR Rondelle-MWab 100 mmcarton100
Ejotherm STR Rondelle-EPS grauab 100 mmcarton100
Plate diameter
mind. 90 mm

EJOT Dรผbelteller VT 90

Plastic anchor plate for ejot screw anchors for flush mounting of mineral wool insulation boards.

Colour shade
white
Packaging
Product namePanel thickness [mm]Plate diameterPieces per unit
Ejot Dรผbelteller VT 9090 mm100
Ejotherm STR-Stopfen500
Ejot Dรผbelteller SBL 140 Plus140 mm100
Ejot Dรผbelteller VT 2Gab 100 mmmind. 110 mm100
Plate diameter
90 mm

EJOT Dรผbelteller SBL 140 Plus

Plastic anchor plate for Ejot screw anchors for flush mounting of mineral wool lamellas.

Colour shade
white
Packaging
Product namePanel thickness [mm]Plate diameterType of containerPieces per unit
Ejot Dรผbelteller SBL 140 Plus140 mmcarton100
Ejotherm STR-Stopfencarton500
Ejot Dรผbelteller VT 9090 mmcarton100
Ejot Dรผbelteller VT 2Gab 100 mmmind. 110 mmcarton100
Plate diameter
140 mm

KEIM Armierungsmasse-100

Hydraulically setting mortar for bonding and reinforcing.

Medium to thick-layer reinforcement 4 - 15 mm in KEIM ETIC systems.

Colour shade
natural white
Application
power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
Consumption
approx. 1,1 kg/mยฒ per mm for reinforcement.
approx. 3,5 kg/mยฒ zum Kleben der Platten.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag20kg36

KEIM Glassfibre-Reinforcing-Mesh 6x6

System-related reinforcement fabric for KEIM AquaROYAL and KEIM Klassik-Plus external thermal insulation composite systems, alkali-resistant, non-slip.

Colour shade
grey
Consumption
approx. 1,1 mยฒ/mยฒ
Mesh width
6 x 6 mm

KEIM Stucasol

Ready-to-use sol-silicate plaster with unique binder concept for a particularly uniform appearance, even without additional coating.

Colour shade
White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
No monochrome shades available. For feasibility see colour tool at www.keim.com.
Application
power stirrer, feed pump, filler knife, trowel
Consumption
Scratch plaster structure:
K1 (1 mm) - approx. 1.5 kg/mยฒ
K1,5 (1.5 mm) - approx. 2.3 kg/mยฒ
K2 (2 mm) - approx. 3.0 kg/mยฒ
K3 (3 mm) - approx. 3.6 kg/mยฒ
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket25kg24

KEIM Brillantputz

High-quality, mineral, thin-layer, lightweight plaster based on white lime, white cement and high-grade marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.

Colour shade
White and colour shades exclusively with pure mineral lightfast pigments. No monochrome shades/full shades available.
Minimum order quantity of tinted material 150 kg.
Application
power stirrer, filler knife, trowel, rendering machine, feed pump
Consumption
Rough plaster 2 mm: approx. 2.2 kg/mยฒ
Rough plaster 3 mm: approx. 3.0 kg/mยฒ
Grooved plaster 2 mm: approx. 2.5 kg/mยฒ
Grooved plaster 3 mm: approx. 3.0 kg/mยฒ
Smooth plaster: approx. 3 - 4 kg/mยฒ applies for 3 mm layer thickness
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg30

KEIM Mineralputz

High-quality, mineral, thin-layer, lightweight plaster as rough plaster, grain size 5 mm on the basis of white lime, white cement and valuable marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.

Colour shade
natural white
Application
power stirrer, feed pump, filler knife, trowel, rendering machine
Consumption
approx. 5 kg/mยฒ
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg30

KEIM Soldalit

Universal, silicate-based facade paint with a sol-silicate binder (combination of silica sol and water glass) for organic, mineral and mixed substrates as well as ETICS. KEIM Soldalit is water-repellent, highly diffusible, lightfast, UV-stable and extremely weather-resistant with minimal soiling tendency. Organic content < 5%.

Officially recommended by Sentinel-Haus-Institut!

Colour shade
White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
Monochrome shades 9001S-9012S available. For feasibility see colour tool at www.keim.com.
Application
paint brush, roller, airless sprayer
Consumption
approx. 0,45 kg/mยฒ for two coatings.
Packaging

KEIM Egalisationsfarbe

Single-layer levelling paint. KEIM Ausgleichsfarbe (equalising paint) is a silicate facade paint for levelling stains on coloured mineral renders, especially for levelling coloured, visually inhomogeneous finishing plasters and silicate plasters.

Colour shade
White and colour shades. For feasibility see colour tool at www.keim.com.
Application
paint brush, roller, airless sprayer
Consumption
approx. 0,20 l/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket15l24
bucket5l70
bucket2.5l80
Jump to the top of the page