Jump to the content of the page
Austria | EN
Stuccos and renders

KEIM Renovation and moisture regulation renders: Porosan and Seccopor

It's all about the pores - high performance renders that are open to diffusion.

Repair damaged structural substances

Buildings are subject to significant environmental influences. These can cause severe damage to their structure. Moisture can get into brickwork and bring dissolved salts with it. Damage from moisture and salt will result in visible stains, efflorescence and paint or render flaking from the surface.

The special KEIM Porosan Sanierputz (renovation render) system, in combination with sealing measures, can successfully and permanently repair damaged structures. KEIM Porosan Sanierputz (renovation render) systems are characterised by high water-repellency and concurrent openness to diffusion. Moisture evaporates in the form of vapour, while salt can crystallise in the large pore volume without causing any damage.

The KEIM Seccopor System is characterised by its hydrophilic properties and is used when humidity levels in a room need to be regulated, and condensation avoided. This render system is excellent for application on moist brickwork which is not heavily contaminated with salt, e.g. following flooding damage. It competently aids drying because it does not contain water-repelling substances.


NOTE:  For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!

KEIM renovation and moisture regulation renders

KEIM Porosan-Trass-Sanierputz-NP

Factory-made dry mortar in accordance with DIN 18557 and DIN EN 998-1(R). Restoration plaster WTA, pore-hydrophobic special plaster for exterior and interior use for the restoration of salt-damaged plaster surfaces above ground level. Also suitable for wall surfaces with high moisture loads on historical buildings, old buildings, in the base area, cellars, etc.

Colour shade
grey
Application
filler knife, trowel, power stirrer, rendering machine without postmixer and air entraining screw jackets
Consumption
approx. 1,1 kg/mΒ² per mm
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg42

KEIM Porosan-HF-Sanierputz

Factory-made dry mortar in accordance with DIN 18557 and DIN EN 998-1(R). Restoration plaster WTA.

Fast setting - white

Grain size: 0 - 1 mm

Pore-hydrophobic special plaster with fast setting for interior and exterior use to repair salt-damaged plaster surfaces above ground level. Also suitable for wall surfaces with high moisture loads on historical buildings, old buildings, in the base area, cellars, etc.

Colour shade
natural white
Application
power stirrer, filler knife, trowel, rendering machine without postmixer
Consumption
approx. 1,0 kg/mΒ² per mm
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg42

KEIM Porosan-Ausgleichsputz-NP

Factory-made dry mortar in accordance with DIN 18557 and DIN EN 998-1. Base plaster WTA, supplementary product to KEIM Porosan-Trass-Sanierputz-NP or

KEIM Porosan-HF-Sanierputz. KEIM Porosan-HF-Sanierputz for the repair of salt-damaged plaster surfaces.

Serves to level out larger depressions, irregular masonry and/or as a salt reservoir in the case

Colour shade
grey
Application
power stirrer, filler knife, trowel, rendering machine without postmixer and air entraining screw jackets
Consumption
approx. 1,2 kg/mΒ² per mm
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg42

KEIM Porosan-Trass-Zementputz

Hydraulically setting dry mortar according to DIN 18557 and DIN EN 998-1. As a bonding primer for secure bonding between

poorly absorbent masonry and KEIM PorosanTrass-Sanierputz-NP or KEIM Porosan-HF-Sanierputz or KEIM Porosan-Ausgleichsputz-NP.

Also as full-surface barrier and base plaster in combination with KEIM Porosan-DichtungsschlΓ€mme.

Colour shade
natural
Application
power stirrer, filler knife, trowel, rendering machine
Consumption
approx. 1,56 kg/mΒ² per mm as full-cover plinth render.
approx. 5 kg/mΒ² als halbdeckender Haftvorspritz
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg42

KEIM Porosan-DichtungsschlΓ€mme

Mineral coating based on cement, fine sands and sealant. Used for vertical waterproofing of structures, interior and exterior, to protect against ground moisture, non-pressing surface/seepage water and pressing water.

Colour shade
grey
Application
power stirrer, block brush, trowel
Consumption
For load case soil moisture + non-pressing water:
Required total wet film thickness: 2.5 mm (corresponds to β‰₯ 2 mm dry film thickness)
Consumption: approx. 5 kg/mΒ²
For load case pressing water:
Required total wet film thickness: 3.5 mm (corresponds to β‰₯ 3 mm dry film thickness)
Consumption: approx. 7,0 kg/mΒ²
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg40

KEIM Seccopor-Fino

Special fine plaster without hydrophobic coating with particularly good moisture transport

and excellent moisture regulation. Standard plaster mortar according to DIN EN 998-1, mortar category CS II.

Colour shade
natural white
Application
filler knife, power stirrer, notched trowel, trowel, rendering machine
Consumption
approx. 1,4 kg/mΒ² per mm
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg36

KEIM Seccopor-Grosso

Special plaster without water repellent with particularly good moisture transport and excellent moisture regulation.

Standard plaster mortar according to DIN EN 998-1, mortar category CS II.

Colour shade
grey
Application
filler knife, power stirrer, notched trowel, trowel, rendering machine
Consumption
approx. 1,4 kg/mΒ² per mm
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg36
Jump to the top of the page