Jump to the content of the page
Austria | EN
Interior insulation

KEIM iPor

If it doesn't fit on the outside - our effective alternative in tried and tested quality.

KEIM interior-insulation system iPor - the effective alternative

It is unfortunately the case that those buildings with the most artistically decorative facades have the worst heat insulation, but in most cases they also feature generously-sized rooms and interior spaces. 10 cm less for a cosy home. With our KEIM interior climate systems, you don't have to make any more compromises. Why not just find out for yourself! There are good reasons for interior insulation.
 

  • Richly decorated facades
  • Elaborate details
  • Residential property in a multiple-dwelling house
  • Temporary building use
  • Adherence with the construction boundaries

Mould protection, functional interior insulation or a premium solution?

Depending on demands and expectations, you can configure your system for simple mould protection, functional interior insulation or as a premium structure with the best possible climate properties for interior spaces. All variations have one in thing in common: they can be created using just three components, and require little effort.

Interior insulation systems do not have to be wrapped-up airtight from the ambient air โ€“ quite the opposite, in fact: One realisation has become increasingly more prominent: that capillary-active systems, which can deal with the moisture that occurs in room air, have shown themselves to be far less prone to installation errors or subsequent penetration, as well as having a particularly positive influence on the room climate. Calculations can easily furnish proof of which thermal bridges establish themselves.

In the case of insulation panel thicknesses starting from 50 mm, the system should always be well planned and recalculated, to ensure that the result continues to please over the long term.

Why a KEIM iPor system?

The iPor system is a capillary-active interior insulation system that is easy-to-create and which is open to diffusion. Complicated installation details for creating a vapour-tight level are not necessary. To prevent thermal bridges occurring on jambs or integrated interior walls, reliable accessories are available.


KEIM iPor system products

KEIM Mycal-Por

Lime-bound dry mortar according to DIN EN 998-1 of mortar category CS I. Special mineral lime plaster for interior use with special sorption- and moisture-regulating properties. Also for bonding and reinforcing Mycal-CS boards and for use in KEIM interior insulation and KEIM indoor climate systems.

Colour shade
natural white
Application
power stirrer, filler knife, trowel, rendering machine
Consumption
approx. 1,3 kg/mยฒ per mm for reinforcement or as top coat render.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg42

KEIM Glasfaser-Gittermatte 4x4

System-associated glass-fibre mesh mat for reinforcement in KEIM external thermal insulation composite systems, room climate systems and for reworking plaster cracks.

Slide-resistant and alkali-resistant.

Colour shade
grey
Consumption
approx. 1,1 mยฒ/mยฒ
Mesh width
4 x 4 mm

KEIM iPor TIPwall

Mineral insulation boards for use in the KEIM iPor interior insulation system. Monolithic, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, uncoated.

Reinforcement side labelled.

The insulation boards comply with the increased requirements of the Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.

 

Rated value of thermal conductivity: 0.042 W/mK (from 60 mm), 0.045 W/mK (50 mm)

Colour shade
light grey
Packaging
Panel thickness [mm]Rated value thermal conductivity [W/mK]m² per palletBundle per palletCompressive strength [kPa]
500,04533.7018โ‰ฅ 300
600,04228.0812โ‰ฅ 200
800,04221.0618โ‰ฅ 200
1000,04216.8512โ‰ฅ 200
1200,04214.0412โ‰ฅ 200
1400,04211.2312โ‰ฅ 200
1600,0429.8312โ‰ฅ 200
1800,0428.4212โ‰ฅ 200
2000,0428.4212โ‰ฅ 200
Packaging additional info
Delivery by pallets only, larger thicknesses on request.

KEIM Mycal-Lava

Capillary-active, permeable, fibre-free, mineral, solid insulation panel made of calcium silicate hydrates, biologically harmless and fully recyclable. Incombustible A1 as per DIN EN 13501-1, officially approved.

Colour shade
natural white
Packaging
Panel thickness [mm]Rated value thermal conductivity [W/mK]m² per bundlem² per palletCompressive strength [kPa]
250,055*3.1256.16โ‰ฅ 300
300,050*2.6046.80โ‰ฅ 200
500,045*1.5628.08โ‰ฅ 200
600,045*1.3023.40โ‰ฅ 200
800,045*1.0418.72โ‰ฅ 200
Packaging additional info
* Nominal value of thermal conductivity ฮปD (23/50)

KEIM Mycal-Top

Highly specialised silicate interior paint with various effective approaches against mould infestation. Ensures dry walls through enormous diffusion openness and moisture-regulating properties. Creates an alkali deposit and is therefore proven not to provide a nutrient base for mould fungi. The photocatalytically active pigments can break down pollutants.

Officially recommended by Sentinel-Haus-Institut!

Colour shade
White and colour shades. For feasibility see colour tool at www.keim.com.
Application
paint brush, airless sprayer, roller
Consumption
approx. 0,125 l/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket15l24
bucket5l70
bucket2.5l80

KEIM Biosil

Ready-to-use silicate paint for interior use according to DIN EN 13300. Also fulfils DIN 18363 para. 2.4.1, dispersion silicate paint. Suitable for all common interior wall and ceiling surfaces. (Scrub resistant, wet abrasion class 2 according to DIN EN 13300). Awarded the natureplus test mark. Particularly suitable for living rooms, sickrooms, kindergartens or schools. Suitable for allergy sufferers. Officially recommended by Sentinel-Haus-Institut!

Colour shade
White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
For feasibility see colour tool at www.keim.com.
Application
airless sprayer, paint brush, roller
Consumption
approx. 0,11 l/mยฒ for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket12.5l32
bucket5l70
bucket2.5l80

KEIM Innopro

KEIM Innopro is a high-quality sol-silicate paint for interior use according to DIN 18363 Para. 2.4.1 Dispersion silicate paint. KEIM Innopro is the comfort paint for professionals and is suitable for all new or renovation coats in the wall and/or ceiling area. KEIM Innopro is particularly suitable for use on woodchip wallpaper. The warm comfort white creates a harmonious room atmosphere. KEIM Innopro complies with wet abrasion class 2 according to DIN EN 13300.

Colour shade
White and colour shades. Can be tinted with KEIM PPF-Technologyยฎ according to all common colour collections.
For feasibility see colour tool at www.keim.com.
Application
airless sprayer, roller, paint brush
Consumption
approx. 125 ml/mยฒ for a single coating.
Jump to the top of the page