KEIM Renovation and moisture regulation renders: Porosan and Seccopor
It's all about the pores - high performance renders that are open to diffusion.
Repair damaged structural substances
Buildings are subject to significant environmental influences. These can cause severe damage to their structure. Moisture can get into brickwork and bring dissolved salts with it. Damage from moisture and salt will result in visible stains, efflorescence and paint or render flaking from the surface.
The special KEIM Porosan Sanierputz (renovation render) system, in combination with sealing measures, can successfully and permanently repair damaged structures. KEIM Porosan Sanierputz (renovation render) systems are characterised by high water-repellency and concurrent openness to diffusion. Moisture evaporates in the form of vapour, while salt can crystallise in the large pore volume without causing any damage.
The KEIM Seccopor System is characterised by its hydrophilic properties and is used when humidity levels in a room need to be regulated, and condensation avoided. This render system is excellent for application on moist brickwork which is not heavily contaminated with salt, e.g. following flooding damage. It competently aids drying because it does not contain water-repelling substances.
NOTE: For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!
KEIM renovation and moisture regulation renders
KEIM Porosan-HF-Sanierputz
Factory-made dry mortar in accordance with DIN 18557 and DIN EN 998-1(R). Restoration plaster WTA.
Fast setting - white
Grain size: 0 - 1 mm
Pore-hydrophobic special plaster with fast setting for interior and exterior use to repair salt-damaged plaster surfaces above ground level. Also suitable for wall surfaces with high moisture loads on historical buildings, old buildings, in the base area, cellars, etc.
- Colour shade
- natural white
- Application
- power stirrer, filler knife, trowel, rendering machine without postmixer
- Consumption
- approx. 1,0 kg/mΒ² per mm
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
KEIM Porosan-Ausgleichsputz-NP
Factory-made dry mortar in accordance with DIN 18557 and DIN EN 998-1. Base plaster WTA, supplementary product to KEIM Porosan-Trass-Sanierputz-NP or
KEIM Porosan-HF-Sanierputz. KEIM Porosan-HF-Sanierputz for the repair of salt-damaged plaster surfaces.
Serves to level out larger depressions, irregular masonry and/or as a salt reservoir in the case
- Colour shade
- grey
- Application
- power stirrer, filler knife, trowel, rendering machine without postmixer and air entraining screw jackets
- Consumption
- approx. 1,2 kg/mΒ² per mm
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
KEIM Porosan-Trass-Zementputz
Hydraulically setting dry mortar according to DIN 18557 and DIN EN 998-1. As a bonding primer for secure bonding between
poorly absorbent masonry and KEIM PorosanTrass-Sanierputz-NP or KEIM Porosan-HF-Sanierputz or KEIM Porosan-Ausgleichsputz-NP.
Also as full-surface barrier and base plaster in combination with KEIM Porosan-DichtungsschlΓ€mme.
- Colour shade
- natural
- Application
- power stirrer, filler knife, trowel, rendering machine
- Consumption
- approx. 1,56 kg/mΒ² per mm as full-cover plinth render
approx. 5 kg/mΒ² als halbdeckender Haftvorspritz - Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
KEIM Porosan-DichtungsschlΓ€mme
Mineral coating based on cement, fine sands and sealant. Used for vertical waterproofing of structures, interior and exterior, to protect against ground moisture, non-pressing surface/seepage water and pressing water.
- Colour shade
- grey
- Application
- power stirrer, block brush, trowel
- Consumption
- For load case soil moisture + non-pressing water:
Required total wet film thickness: 2.5 mm (corresponds to β₯ 2 mm dry film thickness)
Consumption: approx. 5 kg/mΒ²
For load case pressing water:
Required total wet film thickness: 3.5 mm (corresponds to β₯ 3 mm dry film thickness)
Consumption: approx. 7,0 kg/mΒ² - Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
KEIM Seccopor-Fino
Special fine plaster without hydrophobic coating with particularly good moisture transport
and excellent moisture regulation. Standard plaster mortar according to DIN EN 998-1, mortar category CS II.
- Colour shade
- natural white
- Application
- filler knife, power stirrer, notched trowel, trowel, rendering machine
- Consumption
- approx. 1,4 kg/mΒ² per mm
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 36
KEIM Seccopor-Grosso
Special plaster without water repellent with particularly good moisture transport and excellent moisture regulation.
Standard plaster mortar according to DIN EN 998-1, mortar category CS II.
- Colour shade
- grey
- Application
- filler knife, power stirrer, notched trowel, trowel, rendering machine
- Consumption
- approx. 1,4 kg/mΒ² per mm
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 36
