KEIM Concretal-mortar and fillers
Tried and tested systems for repairing areas of decay. All products are polymer-modified, cement-bound building materials (PCC) which are mixed with water.
NOTE: For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!
KEIM Concretal-mortar system products
KEIM Concretal-MKH
Mineral, cement-based, one-component corrosion protection and bonding bridge according to ZTV-ING PCC I and II. Application as mineral corrosion protection of reinforcement in concrete and as bonding bridge for force-fit connection of Concretal-Mörtel-R in concrete repair.
- Colour shade
- grey
- Application
- paint brush, block brush
- Consumption
- approx. 120 g per linear metre as corrosion protection for a reinforcing steel with ∅ 16 mm
approx. 1050 g/m² as adhesion bridge - Packaging
Type of container Container content Unit of measure Quantity on pallet bag 20 kg 40
KEIM Repair-Mortar
Mineral, cement-based, one-component coarse mortar according to ZTV-ING PCC I and II. Repair mortar for repairing larger defects. Layer thickness from 5 mm to 50 mm (multi-layer). Use together with Concretal-MKH. Low-shrinkage and crack-free curing even when subjected to dynamic loads. Non-carbonating, frost-proof, resistant to de-icing salt, impermeable to water, can be sprayed using the wet spraying method.
- Colour shade
- grey
- Application
- trowel, wet-flow spraying machine, fill
- Consumption
- 2,0 kg/m² per mm
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 40
KEIM Concretal-MR 2.0
Mineral, cement-based, one-component coarse mortar according to ZTV-ING PCC I and II. Repair mortar for repairing larger defects. Layer thickness from 5 mm to 50 mm (multi-layer). Use together with Concretal-MKH. Low-shrinkage and crack-free curing even when subjected to dynamic loads. Non-carbonating, frost-proof, resistant to de-icing salt, impermeable to water, can be sprayed using the wet spraying method.
- Colour shade
- grey
- Application
- trowel, wet-flow spraying machine, fill
- Consumption
- approx. 1,8 kg/m² per mm
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 40
KEIM Concretal-FSP 0.2
For application PCC II of ZTV-ING.
For levelling repair areas (mortar) and for closing pores and cavities by scratch filling. Full-surface filling in layer thicknesses of 0.5 - 4 mm. Application as shrinkage slurry with addition of Concretal special hardener to the mixing water. Waterproof, frost-proof, resistant to de-icing salt and sprayable using the wet spraying method.
- Colour shade
- grey
- Application
- trowel, filler knife, block brush, wet-flow spraying machine, fill
- Consumption
- approx. 1,75 kg/m² per mm for full-cover skim coating. approx. 0,8 - 1,5 kg/m² bei Kratzspachtelung (abhängig vom Porenvolumen)
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 40
KEIM Concretal-SD
Additive to the mixing water for Concretal fine filler for difficult substrates and when used as a scratch filler or shrinkage slurry.
- Colour shade
- milky
- Application
- block brush, trowel
- Consumption
- approx. 0,06 L/m² per mm as blowhole grout.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 5 L 70
KEIM Concretal-UM 0.5
Rapid repair mortar for concrete in building construction for repairing damaged areas, layer thickness 1 mm to 60 mm (multi-layer). Can be applied without corrosion protection and bonding agent, excellent adhesion, stable in wall and overhead areas, can be smoothed as a coarse filler. Suitable for repairing lightweight concrete.
- Colour shade
- grey
- Application
- fill, filler knife, trowel, float
- Consumption
- approx. 1,8 kg/m² per mm
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 40
