Jump to the content of the page
Austria | EN
Reinforcement

Adhesive and reinforcement mortars

Adhesive and reinforcement mortars are purely functional. They must hold the insulation panels securely on the substrate, protect them against moisture and provide a crack-free substrate for the top render.
Particularly in hydroactive render and coating systems, but also in order to guarantee good overall structural physics, all KEIM adhesive and reinforcement mortars are adapted to the entire system and optimised to the corresponding demands. This guarantees the desired result.


NOTE:  For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!

KEIM Pulverkleber-90

Hydraulically setting, powdery cement-based adhesive.

Adhesive and reinforcing compound for KEIM external thermal insulation composite systems.

Colour shade
grey
Application
power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
Consumption
approx. 4–5 kg/mΒ² as adhesive or reinforcement.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg36
KEIM AquaROYAL-ArmierungsmΓΆrtel

Mineral, thick-layer reinforcing mortar with hydroactive properties, layer thickness approx. 7 mm, without addition of biocides for optimised toxin-free algae prevention in KEIM AquaROYAL MW and EPS insulation systems.

Colour shade
natural white
Application
power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
Consumption
approx. 8 kg/mΒ² for reinforcement.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag20kg36
KEIM Armierungsmasse-100

Hydraulically setting mortar for bonding and reinforcing.

Medium to thick-layer reinforcement 4 - 15 mm in KEIM ETIC systems.

Colour shade
natural white
Application
power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump
Consumption
approx. 1,1 kg/mΒ² per mm for reinforcement.
approx. 3,5 kg/mΒ² zum Kleben der Platten.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag20kg36
KEIM Indulaqua

Water-based, solvent-free primer and consolidating agent based on acrylic resin dispersion. Ready-to-use primer for unpainted, chipped and absorbent concrete substrates and for unpainted absorbent old plasters. Especially before applying an ETIC system.

Colour shade
milky
Application
block brush, to flood, roller
Consumption
approx. 0,2-0,4 l/mΒ² for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can10l60
KEIM Indulastic-P

Dispersion component for the production of an adhesive compound for base and perimeter insulation boards, as well as a mineral, paintable moisture protection.

Must be mixed 1:1 with cement (CEM I 32.5).

Colour shade
white
Application
power stirrer, filler knife, trowel
Consumption
approx. 4 kg/mΒ² as adhesive or reinforcement.
approx. 1 kg/mΒ² als Feuchteschutz
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket18kg32
KEIM Bitucoll-2K

Two-component, plastic-modified, stable and fibre-reinforced bitumen compound with good adhesion on slightly damp and dry substrates. For bonding protective, drainage or insulation boards to sealed exterior basement walls and base surfaces. Also suitable as a damp-proofing coat at the base of unfinished buildings and as a crack-bridging thick coating for waterproofing buildings on normally absorbent substrates.

Colour shade
black
Consumption
approx. 2,2 kg/mΒ² for gluing.
approx. 5,8 kg/mΒ² gegen aufstauendes Sickerwasser
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket22kg
bag8kg
set30kg18
Jump to the top of the page