Jump to the content of the page
Language: EN

You are on our general international page. To see country-specific content, please .

Reinforcement

Adhesive and reinforcement mortars

Adhesive and reinforcement mortars are purely functional. They must hold the insulation panels securely on the substrate, protect them against moisture and provide a crack-free substrate for the top render.
Particularly in hydroactive render and coating systems, but also in order to guarantee good overall structural physics, all KEIM adhesive and reinforcement mortars are adapted to the entire system and optimised to the corresponding demands. This guarantees the desired result.


KEIM AquaROYAL-ArmierungsmΓΆrtel

Mineral, thick-layer reinforcing mortar with hydroactive properties, layer thickness approx. 7 mm, without addition of biocides for optimised toxin-free algae prevention in KEIM AquaROYAL MW and EPS insulation systems.

Colour shade
natural white
Consumption
8 kg/mΒ² for reinforcement.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag20kg36
KEIM Armierungsmasse-100

Hydraulically setting mortar for bonding and reinforcing.

Medium to thick-layer reinforcement 4 - 15 mm in KEIM ETIC systems.

Colour shade
natural white
Consumption
1,1 kg/mΒ² per mm for reinforcement.
approx. 3,5 kg/mΒ² zum Kleben der Platten.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag20kg36
KEIM Bitucoll 2K-Plus

Highly flexible, two-component, polystyrene foam-filled, plastic-modified bitumen thick coating (PMBC). For bonding perimeter and base insulation boards.

Suitable for Masonry or concrete, rendered and unrendered; building sealing.

Also suitable as moisture protection at the base of unfinished buildings on normally absorbent substrates. As building waterproofing only on request.

Colour shade
black-brown
Consumption
2 - 3 L for gluing.
KEIM Indulaqua

Water-based, solvent-free primer and consolidating agent based on acrylic resin dispersion. Ready-to-use primer for unpainted, chipped and absorbent concrete substrates and for unpainted absorbent old plasters. Especially before applying an ETIC system.

Colour shade
milky
Consumption
0,2-0,4 L/mΒ² for a single coating.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
jerry can10L60
KEIM Indulastic-P

Dispersion component for the production of an adhesive compound for base and perimeter insulation boards, as well as a mineral, paintable moisture protection.

Must be mixed 1:1 with cement (CEM I 32.5).

Colour shade
white
Consumption
4 kg/mΒ² as adhesive or reinforcement.
approx. 1 kg/mΒ² als Feuchteschutz
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket18kg32
KEIM Klebespachtel

Organic cement-free adhesive filler for sticking EPS rigid foam boards to flat, slightly absorbent substrates such as board materials in timber construction.

Colour shade
white
Consumption
2,5 kg/mΒ² for gluing.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket25kg24
KEIM Pulverkleber-90

Hydraulically setting, powdery cement-based adhesive.

Adhesive and reinforcing compound for KEIM external thermal insulation composite systems.

Colour shade
natural white
Consumption
4–5 kg/mΒ² as adhesive or reinforcement.
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg36
Jump to the top of the page