Pretreatments and cleaners
Matched perfectly to our products: for clean substrates β for clean solutions: Aesthetical surfaces are no coincidence. A clean substrate with appropriate cleaning and pretreatment provides the foundation for lasting aesthetics. Unclean substrates often lead even without optical complaints after longer periods to unattractive surfaces. KEIM pretreatment and cleaners prevent customer complaints and pay off quickly.
NOTE: For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!
Products overview
KEIM Mycal-XO
Ready-to-use, aqueous disinfectant for pre-treatment and cleaning of microbially contaminated or soiled interior wall surfaces. Does not contain chlorine. The active hydrogen peroxide component reacts during application to form oxygen and water. Use disinfectant safely. Always read the marking and product information before use.
- Colour shade
- transparent
- Application
- block brush
- Consumption
- approx. 0,1 L/mΒ² for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 2.5 L 72 bottle 1 L 200
KEIM Fluat-10
For removing lime sinter layers and cleaning plasters.
- Colour shade
- light pink, transparent
- Application
- block brush
- Consumption
- approx. 0,07 L/mΒ² for outside for a single coating.
approx. 0,05 L/mΒ² for inside fΓΌr einen einmaligen Anstrich. - Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 20 L 24 jerry can 5 L 96
KEIM Lime Remover
For removing lime sinter layers and cleaning plasters.
- Colour shade
- light pink, transparent
- Application
- block brush
- Consumption
- 0,07 l/mΒ² for exterior surfaces for a single coating.
approx. 0,05 l/mΒ² for interior interfaces for a singel coating. - Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 5 l 96
KEIM Algicid-Plus
Pre-treatment/protective agent against algae and mould infestation. Formulated ready for use. KEIM Algicid-Plus Prevents renewed infestation. Use biocides safely. Always read the marking and product information before use.
- Colour shade
- transparent
- Application
- block brush, to flood
- Consumption
- approx. 0,25 L/mΒ²
- Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 20 L 24 jerry can 5 L 96
KEIM Dispersionsentferner
For removing synthetic resin-bound, film-forming paints and synthetic resin plasters. Biodegradable. Without chlorinated hydrocarbons.
- Colour shade
- yellowish
- Application
- block brush, roller, airless sprayer
- Consumption
- approx. 0,3 - 0,5 kg/mΒ², for normal dispersion coatings.
approx. 1,0 kg/mΒ², bei RissΓΌberbrΓΌckungssystemen, ΓΌberstrichenen Kunstharzputzen und mehrschichtigen Anstrichsystemen. - Packaging
Type of container Container content Unit of measure Quantity on pallet tin bucket 25 kg 12 tin bucket 5 kg 66
KEIM Stonecleaner-N
Neutral, biodegradable cleaning concentrate, especially suitable for mild and gentle cleaning of natural stone and clinker facades.
KEIM Stonecleaner-N is to be diluted with water in a ratio of 1:10. KEIM Stonecleaner-N is adapted to the requirements of steam-blasting equipment.
- Colour shade
- yellow-brown
- Application
- block brush, steam cleaner
- Consumption
- Determine consumption on the basis of sample surfaces.
- Packaging
Type of container Container content Unit of measure jerry can 10 kg
KEIM Concretal-Cleaner
Hexafluorosilicic acid-based cleaning agent for removing dirt and release agent residues from concrete surfaces. Can also be used on plaster substrates. Reacts to form compounds that are not harmful to the building when used.
- Colour shade
- transparent colourless
- Application
- block brush
- Consumption
- approx. 0,05 L/mΒ² for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 5 L 96
KEIM Concrete-Cleaner
Hexafluorosilicic acid-based cleaning agent for removing dirt and release agent residues from concrete surfaces. Can also be used on plaster substrates. Reacts to form compounds that are not harmful to the building when used.
- Colour shade
- transparent colourless
- Application
- block brush
- Consumption
- 0,05 l/mΒ² for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 20 l 24 jerry can 5 l 96
