Grafitti protection
Following the tradition of treating both historic and contemporary building fabric with care and sustainability, KEIM offers graphite protection products that protect the original building fabric but do not chemically or physically impair it. The products are completely reversible. Due to these properties, they are even recommended by monument conservation authorities.
NOTE: For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!
Overview of products
KEIM Aravel
Temporary, transparent graffiti protection system as a sacrificial layer to protect mineral surfaces such as natural and artificial stone, set concrete, bricks or eternit panels. KEIM Aravel is equally suitable for use on historical and modern building fabric or in infrastructure construction.
- Colour shade
- transparent
- Application
- block brush, roller, airless sprayer
- Packaging
Type of container Container content Unit of measure jerry can 20 L jerry can 5 L
KEIM Aravel-Beton
Temporary, transparent graffiti protection system especially for concrete surfaces. Serves as a sacrificial layer for the protection of mineral surfaces such as concrete (also residual alkaline), artificial stone, brick or Eternit panels. KEIM Aravel Beton is equally suitable for historic and modern buildings or in infrastructure construction.
- Colour shade
- transparent
- Application
- block brush, roller, airless sprayer
- Packaging
Type of container Container content Unit of measure jerry can 20 L jerry can 5 L
KEIM Aravel-Remover
WΓ€ssriger Reiniger, frei von FCKW, CKW und armoatischen Kohlenwasserstoffen. Wird eingesetzt zur Entfernung von Graffitis, Tags und zum restlosen Entfernen des Graffiti-Schutzes Aravel bzw. Aravel Beton.
- Colour shade
- colourless
- Application
- airless sprayer, roller, block brush
- Packaging
Type of container Container content Unit of measure jerry can 5 L SprΓΌhflasche 0.5 L
Flagranti
Reversible, opaque special coating to combat graffiti.
Application case 1: Prevention
Apply KEIM Flagranti as two coats to the clean, dry substrate or dry paint. Allow at least 12 hours for drying between coats.
Application case 2: Covering
Coat the graffiti-damaged areas with KEIM Flagranti over the entire surface. As a rule, a single application is sufficient. In the case of very dense graffiti, a second overcoat may be necessary. In case of repeated graffiti damage, the overcoat can be applied several times in the same manner.
- Consumption
- Application case 1, prevention
Approx. 0.3 l/m2 for two coats.
Application case 2, covering
approx. 0.15 l/m2 for a single coat. - Packaging
Type of container Container content Unit of measure bucket 15 L bucket 5 L
KEIM Aravel
Temporary, transparent graffiti protection system as a sacrificial layer to protect mineral surfaces such as natural and artificial stone, set concrete, bricks or eternit panels. KEIM Aravel is equally suitable for use on historical and modern building fabric or in infrastructure construction.
- Colour shade
- transparent
- Application
- block brush, roller, airless sprayer
- Packaging
Type of container Container content Unit of measure jerry can 20 L jerry can 5 L
