KEIM MYCAL-System
The KEIM Mycal mould remediation system impresses with unrivalled moisture management, high alkalinity and easy handling: Mould prevention and remediation.
Effective mould prevention indoors
For sustainable mould remediation, it is essential to combat the causes and remedy the damage. Depending on the extent of the damage and the risk potential, each individual case must be examined and suitable measures for repair must be determined.
The KEIM Mycal mould remediation system for the elimination or prevention of mould infestation includes a variety of intelligent solutions, making every mould problem simple and easy and, above all, safe to handle. It consists of various healthy, mineral individual products, which provide individually adapted remediation options in various combinations. The best choice in any case!
NOTE: For country-specific product information and data sheets please go to the respective official national language! The safety data sheets below are in accordance with German law!
KEIM Mycal system products
KEIM Mycal-Top
Highly specialised silicate interior paint with various effective approaches against mould infestation. Ensures dry walls through enormous diffusion openness and moisture-regulating properties. Creates an alkali deposit and is therefore proven not to provide a nutrient base for mould fungi. The photocatalytically active pigments can break down pollutants. KEIM Mycal-Top is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโข Gold.
- Colour shade
- White and colour shades.
- Application
- block brush, airless sprayer, roller
- Consumption
- 0,125 L/mยฒ for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bucket 12.5 L 32 bucket 5 L 70 bucket 2.5 L 80
KEIM Mycal-Por
Lime-bound dry mortar according to DIN EN 998-1 of mortar category CS I. Special mineral lime plaster for interior use with special sorption- and moisture-regulating properties. Also for bonding and reinforcing Mycal-CS boards and for use in KEIM interior insulation and KEIM indoor climate systems.
- Colour shade
- natural white
- Application
- power stirrer, filler knife, trowel, rendering machine
- Consumption
- 1,3 kg/mยฒ per mm for reinforcement or as top coat render.
- Packaging
Type of container Container content Unit of measure Quantity on pallet bag 25 kg 42
KEIM Mycal-Lava
Capillary-active, permeable, fibre-free, mineral, solid insulation panel made of calcium silicate hydrates, biologically harmless and fully recyclable. Incombustible A1 as per DIN EN 13501-1, officially approved.
- Colour shade
- natural white
- Packaging
Panel thickness [mm] Rated value thermal conductivity [W/mK] m² per bundle m² per pallet Compressive strength [kPa] 25 0,055* 3.12 56.16 โฅ 300 30 0,050* 2.60 46.80 โฅ 200 50 0,045* 1.56 28.08 โฅ 200 60 0,045* 1.30 23.40 โฅ 200 80 0,045* 1.04 18.72 โฅ 200 - Packaging additional info
- * Nominal value of thermal conductivity ฮปD (23/50)
KEIM Mycal Clima-CS
Mineral, lightweight calcium silicate board, non-combustible A1 according to DIN 4102, to prevent condensation and mould formation and thus ensures a healthy and comfortable indoor climate. The board can also be used to improve thermal insulation indoors. Panel size: 100 x 62.5 cm. Board thickness: 25 mm
- Colour shade
- light grey
- Packaging
Panel thickness [mm] Rated value thermal conductivity [W/mK] m² per bundle m² per pallet Bundle per pallet Pieces per unit 25 0,062 10 50 5 16 25 0,062 30 60 2 48 - Packaging additional info
- Covenant-wise. Other panel thicknesses, formats and packaging units on request.
KEIM Mycal Clima-LP
Room-side pre-primed soffit panel made of calcium silicate, approved by the building authorities according to ETA-15/0340. for the area of window and door reveals.
- Colour shade
- light grey
- Packaging
Panel size [mm] Panel thickness [mm] Rated value thermal conductivity [W/mK] m² per bundle Pieces per unit 250 x 500 15 0,062 2.5 20
KEIM Mycal Clima-DK
Room-side pre-primed insulation wedge made of calcium silicate, approved by the building authorities according to ETA-15/0340. for reducing thermal bridges in the ceiling and wall connection area and for visually levelling butt edges.
- Colour shade
- light grey
- Packaging
Panel size [mm] Panel thickness [mm] Rated value thermal conductivity [W/mK] m² per bundle Pieces per unit 1250 x 500 30/8 0,062 2.5 4
KEIM Mycal-Fix
Silicate pre-treatment agent for binding fungal spores and for priming Mycal-CS boards or highly absorbent substrates. KEIM Mycal-Fix has a consolidating and absorbency-regulating effect. Binds mould fungi and spores on affected surfaces. Due to its high pH value, it also has a mould-inhibiting effect. KEIM Mycal-Fix is awarded with Cradle to Cradle Certifiedยฎ Silver and C2C Certified Material Health Certificateโข Gold.
- Colour shade
- milky
- Application
- block brush, roller
- Consumption
- 0,15 L/mยฒ as base coat.
- Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 5 L 96
KEIM Mycal-XO
Ready-to-use, aqueous disinfectant for pre-treatment and cleaning of microbially contaminated or soiled interior wall surfaces. Does not contain chlorine. The active hydrogen peroxide component reacts during application to form oxygen and water. Use disinfectant safely. Always read the marking and product information before use.
- Colour shade
- transparent
- Application
- block brush
- Consumption
- 0,1 L/mยฒ for a single coating.
- Packaging
Type of container Container content Unit of measure Quantity on pallet jerry can 2.5 L 72 bottle 1 L 200
