Jump to the content of the page
Shop United Kingdom | EN
Concrete systems

KEIM Concretal-mortar and fillers

Tried and tested systems for repairing areas of decay. All products are polymer-modified, cement-bound building materials (PCC) which are mixed with water.


KEIM Concretal-mortar system products

KEIM Concretal-MKH

Mineral, cement-based, one-component corrosion protection and bonding bridge according to ZTV-ING PCC I and II. Application as mineral corrosion protection of reinforcement in concrete and as bonding bridge for force-fit connection of Concretal-Mรถrtel-R in concrete repair.

Colour shade
grey
Application
paint brush, block brush
Consumption
approx. 120 g per linear metre as corrosion protection for a reinforcing steel with โˆ… 16 mm
approx. 1050 g/mยฒ as adhesion bridge
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag20kg40

KEIM Repair-Mortar

Mineral, cement-based, one-component coarse mortar according to ZTV-ING PCC I and II. Repair mortar for repairing larger defects. Layer thickness from 5 mm to 50 mm (multi-layer). Use together with Concretal-MKH. Low-shrinkage and crack-free curing even when subjected to dynamic loads. Non-carbonating, frost-proof, resistant to de-icing salt, impermeable to water, can be sprayed using the wet spraying method.

Colour shade
grey
Application
trowel, wet-flow spraying machine, fill
Consumption
approx. 2,0 kg/mยฒ per mm
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg40

KEIM Fine-Finishing-Mortar

For application PCC II of ZTV-ING.

For levelling repair areas (mortar) and for closing pores and cavities by scratch filling. Full-surface filling in layer thicknesses of 0.5 - 4 mm. Application as shrinkage slurry with addition of Concretal special hardener to the mixing water. Waterproof, frost-proof, resistant to de-icing salt and sprayable using the wet spraying method.

Colour shade
grey
Application
trowel, filler knife, block brush, wet-flow spraying machine, fill
Consumption
approx. 2,0 kg/mยฒ per mm for full-cover skim coating approx. 0,8 - 1,5 kg/mยฒ for scratch filling (depending on the pore volume)
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bag25kg40

KEIM Concretal-Fine-Filler-Dilution

Additive to the mixing water for Concretal fine filler for difficult substrates and when used as a scratch filler or shrinkage slurry.

Colour shade
milky
Application
block brush, trowel
Consumption
approx. 0,06 l/mยฒ per mm as blowhole grout
Packaging
Type of containerContainer contentUnit of measureQuantity on pallet
bucket5l70
Jump to the top of the page