KEIM Ceramic EPS

Our KEIM Keramik ETIC system offers a wide range of design options.

valuable clinker optics
high design flexibility e.g. combination facades
high application safety
free choice among manufacturers of suitable ceramics

solid masonry
Concrete
aerated concrete
vertically perforated brick, in each case with and without plaster
if necessary, proof of adhesive tensile strength ≥ 0.08 N/mm2
If necessary, prime with KEIM Indulaqua

up to approx. 100 m building height (observe state building regulations!)
flame retardant B1 according to DIN 4102-1 for EPS insulation materials
up to approx. 22 m building height (observe state building regulations!)
KEIM approval Z-33.46-1187

KEIM Fugenmörtel-K

KEIM Fugenmörtel-K is a special, highly flexible cement mortar according to DIN EN 998-2: G, M 10 or DIN V 18580, NM III. For subsequent grouting of ceramic coverings in KEIM ETIC-Systems with ceramic surface. KEIM Fugenmörtel-K Is suitable for absorbent rough ceramic coverings and grouting with the grouting iron.

Colour shade

medium grey

Application

power stirrer, filler knife, sponge float

Packaging

Type of container	Container content	Unit of measure	Quantity on pallet
bag	25	kg	42

Downloads

KEIM Fugenmörtel-KS

KEIM Fugenmörtel-KS is a special mortar according to DIN EN 998-2: G, M 10 or DIN V 18580, NM III. Special, highly flexible cement mortar for subsequent grouting of ceramic coverings in KEIM ETIC-Systems with ceramic surface. KEIM Fugenmörtel-KS is suitable for non-absorbent, smooth ceramic coverings using the slurry method.