KEIM AquaROYAL® MW auf Plattenwerkstoffen

AquaROYAL system

The thermal insulation composite system KEIM AquaROYAL-MW on board materials is non-combustible, woodpecker-proof, sustainable and counteracts microbial growth in terms of building physics on some board materials on request.

Facade insulation with KEIM AquaROYAL MW auf Plattenwerkstoffen

KEIM's premium quality mineral paints - in a unique system
unrivalled resistance to algae or fungi
guaranteed biocide-free
the use of non-combustible insulation materials
mineral, sustainable, valuable & long-lasting

Panel materials generally approved or standardised by the building authorities as external cladding, made of

solid wood (coniferous wood) grading class S10 or strength class C24 as well as glued laminated timber according to DIN 1052
cross laminated timber with layers of solid wood S10/ C24
laminated beams with lamellas of solid wood S10/ C24 or panel materials according to DIN EN 13986 and DIN V2000-1 or general building approval
synthetic resin-bonded chipboard type P5 or P7 ≥ 650 kg/m³, thickness ≥ 16 mm
OSB boards type OSB/3 or OSB/4; ≥600 kg/m³; ≥ 15 mm
cement-bonded particleboards ; ≥1300 kg/m³; ≥ 16 mm
if necessary, special splash water protection in the plinth area
if necessary, proof of adhesive tensile strength ≥ 0.08 N/mm²
other substrates are approved for KEIM MW-Lamelle

Flame retardant B1 according to DIN 4102-1 for insulation thicknesses up to 200 mm
Use in accordance with the requirements of the state building regulations for the entire wall construction KEIM approval Z-33.47-727

ETICS

KEIM Klebespachtel

Organic cement-free adhesive filler for sticking EPS rigid foam boards to flat, slightly absorbent substrates such as board materials in timber construction.

Colour shade

white

Application

power stirrer, filler knife, trowel, notched trowel

Consumption

2,5 kg/m² for gluing.

Packaging

Type of container	Container content	Unit of measure	Quantity on pallet
bucket	25	kg	24

Downloads

Coverrock X-2

Rock wool insulation boards in accordance with DIN EN 13162. For use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.

On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.

The rock wool insulation boards meet the increased requirements of the

Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.

Rated value of thermal conductivity: 0.035 W/mK

Other mineral wool insulation boards on request.

Colour shade

yellow-brown

Packaging

Panel thickness [mm]	m² per bundle	m² per pallet	Bundle per pallet	Dynamic stiffness s` [MN / m³]
80	1.50	15.00	10	11
100	1.50	12.00	8	11
120	1.50	9.00	6	9
140	1.00	8.00	8	9
160	1.00	8.00	8	9
180	1.00	6.00	6	9
200	1.00	6.00	6	6

Downloads

Technical Data Sheet Coverrock X-2

Coverrock II

Rock wool insulation boards according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.

On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.

The rock wool insulation boards meet the increased requirements of the

Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.

Rated value of thermal conductivity: 0.035 W/mK

Other mineral wool insulation boards on request.

Colour shade

yellow-brown

Packaging

Panel thickness [mm]	m² per bundle	m² per pallet	Bundle per pallet	Dynamic stiffness s` [MN / m³]
60	2.00	20.00	10	12
80	1.50	15.00	10	9
100	1.50	12.00	8	8
120	1.50	9.00	6	7
140	1.00	8.00	8	5
160	1.00	8.00	8	5
180	1.00	6.00	6	5
200	1.00	6.00	6	5
220*	0.50	5.00	10	5
240*	0.50	5.00	10	5
260*	0.50	4.00	8	5
280*	0.50	4.00	8	5
300*	0.50	4.00	8	5

Packaging additional info

* Delivery time on request. KEIMFARBEN must be informed of the use in ETIC systems.

Downloads

Technical Data Sheet Coverrock II

Speedrock II

Rock wool lamellas according to DIN EN 13162, for use in a KEIM ETICS according to the provisions of the respective approval. Quality-controlled, non-combustible A1 according to DIN EN 13501-1, dimensionally stable, coated on both sides.

On the coated sides, it is not necessary to apply a press filler. Observe the information on the adhesive side on the packaging or in the technical documents.

The rock wool insulation boards meet the increased requirements of the

Association for Insulation Systems, Plasters and Mortars (VDPM) e.V.

Rated value of thermal conductivity: 0,041 W/mK

Other mineral wool lamellas on request.

Colour shade

yellow-brown

Packaging

Panel thickness [mm]	m² per bundle	m² per pallet	Bundle per pallet	Dynamic stiffness s` [MN / m³]
40*	2.88	28.80	10
60	1.92	19.20	10	100
80	1.44	14.40	10	100
100	0.96	11.52	12	100
120	0.96	9.60	10	80
140	0.96	7.68	8	80
160	0.96	5.76	6	80
180	0.96	5.76	6	70
200	0.96	5.76	6	70
220	0.48	4.80	10	70
240	0.48	3.84	8	70
260	0.48	3.84	8	70
280	0.48	3.84	8	70
300	0.48	3.84	8	70

Packaging additional info

* on request

Downloads

Technical Data Sheet Speedrock II

ejotherm STR H A2

For statically relevant dowelling of insulation boards on wooden substrates according to Z-33.47-727. Recessed or surface-flush installation possible with suitable installation tool.

Colour shade

white

Plate diameter

60 mm

Packaging

Dowel length [mm]	Panel thickness [mm]	Pieces per unit
80	40	100
100	60	100
120	80	100
80	140	100
160	120	100
180	140	100
200	160	100
220	180	100

Packaging

Product name	Panel thickness [mm]	Type of container	Pieces per unit
STR Stopfen		Included when ordering the dowel
STR-Rondelle EPS	ab 100 mm	carton	100
STR-Rondelle EPS grau	ab 100 mm	carton	100
STR-Rondelle MW	ab 100 mm	carton	100
Dübelteller ejotherm VT 2G	ab 100 mm	carton	100
Ejotherm STR Rondelle-MW	ab 100 mm	carton	100
Ejotherm STR Rondelle-EPS grau	ab 100 mm	carton	100
Dübelteller ejotherm VT 90		carton	100
Dübelteller ejotherm SBL 140 Plus		carton	100

Downloads

Technical Data Sheet ejotherm STR H A2

ejotherm Dübelteller VT 2G

Recessed anchor installation in connection with ejotherm STR-U 2G, S1, STR H and STR H A2 from 100 mm insulation board thickness in all mineral wool insulation boards. Recessed setting and screwing in in one operation, to avoid dowel marks, sealing of the insulation material with STR-RondelleMW.

Colour shade

white

Plate diameter

mind. 90 mm

Packaging

Product name	Panel thickness [mm]	Plate diameter	Type of container	Pieces per unit
Ejot Dübelteller VT 2G	ab 100 mm	mind. 110 mm	carton	100
Ejot Dübelteller VT 90		90 mm	carton	100
Ejot Dübelteller SBL 140 Plus		140 mm	carton	100
Ejotherm STR Rondelle-MW	ab 100 mm		carton	100
Ejotherm STR Rondelle-EPS grau	ab 100 mm		carton	100

Downloads

EJOT Dübelteller VT 90

Plastic anchor plate for ejot screw anchors for flush mounting of mineral wool insulation boards.

Colour shade

white

Plate diameter

90 mm

Packaging

Product name	Panel thickness [mm]	Plate diameter	Pieces per unit
Ejot Dübelteller VT 90		90 mm	100
Ejotherm STR-Stopfen			500
Ejot Dübelteller SBL 140 Plus		140 mm	100
Ejot Dübelteller VT 2G	ab 100 mm	mind. 110 mm	100

Downloads

Technical Data Sheet EJOT Dübelteller VT 90

EJOT Dübelteller SBL 140 Plus

Plastic anchor plate for Ejot screw anchors for flush mounting of mineral wool lamellas.

Colour shade

white

Plate diameter

140 mm

Packaging

Product name	Panel thickness [mm]	Plate diameter	Type of container	Pieces per unit
Ejot Dübelteller SBL 140 Plus		140 mm	carton	100
Ejotherm STR-Stopfen			carton	500
Ejot Dübelteller VT 90		90 mm	carton	100
Ejot Dübelteller VT 2G	ab 100 mm	mind. 110 mm	carton	100

Downloads

Technical Data Sheet EJOT Dübelteller SBL 140 Plus

KEIM AquaROYAL-Armierungsmörtel

Mineral, thick-layer reinforcing mortar with hydroactive properties, layer thickness approx. 7 mm, without addition of biocides for optimised toxin-free algae prevention in KEIM AquaROYAL MW and EPS insulation systems.

Colour shade

natural white

Application

power stirrer, filler knife, notched trowel, trowel, rendering machine, feed pump

Consumption

8 kg/m² for reinforcement.

Packaging

Type of container	Container content	Unit of measure	Quantity on pallet
bag	20	kg	36

Downloads

KEIM Glassfibre-Reinforcing-Mesh 6x6

Glassfiber Reinforceing Mesh 6x6 mm

Supplied in 55 sq. m rolls, this Glassfibre Reinforcing Mesh is ideal for use to reinforce the KEIM render systems such as Universal Render, Universal Render Fine and NHL Kalkputz.

Colour shade

grey

Consumption

1,1 m²/m²

Packaging Accessory

Product name	Type of container	Length [m]	m² per bundle	m² per pallet	Bundle per pallet
Glasfaser-Gittermatte 6x6	roll	50	55	1,815	33

Mesh width

6 x 6 mm

Downloads

Technical Data Sheet Glasfaser-Gittermatte 6x6

KEIM AquaROYAL-Mineralputz

Mineral, hydroactive render, without addition of biocides for optimised, toxin-free algae prevention in KEIM AquaROYAL insulation systems.

Colour shade

White and colour shades.

Application

power stirrer, trowel, filler knife, rendering machine

Consumption

Rough 2 mm: approx. 2.3 kg/m²
Rough 3 mm: approx. 3.1 kg/m²
Groove 2 mm: approx. 2.6 kg/m²
Groove 3 mm: approx. 3.1 kg/m²
Smooth plaster: approx. 3.5 kg/m² for 3 mm layer thickness

Packaging

Type of container	Container content	Unit of measure	Quantity on pallet
bag	25	kg	30

Downloads

KEIM Mineralputz

High-quality, mineral, thin-layer, lightweight plaster as rough plaster, grain size 5 mm on the basis of white lime, white cement and valuable marble aggregates. In combination with KEIM Putzgrund as finishing plaster for mineral substrates. Top coat for external thermal insulation composite systems.

Colour shade

natural white

Application

power stirrer, feed pump, filler knife, trowel, rendering machine

Consumption

5 kg/m²

Packaging

Type of container	Container content	Unit of measure	Quantity on pallet
bag	25	kg	30

Downloads

KEIM AquaROYAL-Color

Silica sol silicate paint according to DIN EN 1062-1 with hydrophilic surface and hydroactive properties, without addition of biocides for optimised, toxin-free algae prevention, two coats on KEIM Aqua-ROYAL mineral render, system component of KEIM AquaROYAL insulation systems. KEIM AquaROYAL-Color is awarded with Cradle to Cradle Certified® Silver and C2C Certified Material Health Certificate™ Gold.

Colour shade

White and colour shades.

Application

block brush, roller, airless sprayer

Consumption

0,5-1,0 kg/m² for two coatings.

Packaging

Type of container	Container content	Unit of measure	Quantity on pallet
bucket	25	kg	24
bucket	5	kg	70
bucket	2.5	kg	80

Downloads

KEIM AquaROYAL MW auf Plattenwerkstoffen

Added value through

Substrate

Approval and determination

System overview

KEIM Klebespachtel

Coverrock X-2

Coverrock II

Speedrock II

ejotherm STR H A2

ejotherm Dübelteller VT 2G

EJOT Dübelteller VT 90

EJOT Dübelteller SBL 140 Plus

KEIM AquaROYAL-Armierungsmörtel

KEIM Glassfibre-Reinforcing-Mesh 6x6

KEIM AquaROYAL-Mineralputz

KEIM Mineralputz

KEIM AquaROYAL-Color

Dowel length [mm]	Panel thickness [mm]	Pieces per unit
80	40	100
100	60	100
120	80	100
80	140	100
160	120	100
180	140	100
200	160	100
220	180	100

Dowel length [mm]	Panel thickness [mm]	Pieces per unit
80	40	100
100	60	100
120	80	100
80	140	100
160	120	100
180	140	100
200	160	100
220	180	100

Dowel length [mm]	Panel thickness [mm]	Pieces per unit
80	40	100
100	60	100
120	80	100
80	140	100
160	120	100
180	140	100
200	160	100
220	180	100