Surface Protection
The KEIM range of water repellent and dust suppressant products provide clear surface treatments for all mineral substrates.
Whether it is protecting the substrate from water penetration or to reduce a dusty appearance, KEIM products provide treatments which are highly moisture vapour permeable and long lasting, with minimal effect to the appearance of the surface itself.
OVERVIEW OF KEIM WATER REPELLENTS & DUST SUPPRESANTS
KEIM Lotexan®
KEIM Lotexan is a clear, siloxane based water repellent and dust suppressant treatment for use on alkaline mineral substrates such as concrete, render and brickwork.
When applied onto mineral surfaces, KEIM Lotexan soaks into the substrate and, having a small molecular size, coats the pores of the mineral structure without blocking them. A chemical reaction takes place, creating the water shedding properties of the siloxane, imparting excellent water repellence while maintaining moisture vapour permeability through the open pores.
KEIM Lotexan is a beneficial alternative to silicone which has a much larger molecular size and tends to fill the pores rather than coating them, reducing breathability and often sitting on the surface, creating a glossy or ‘wet look’ effect.
Colour shade
Colourless
Application
Brush, low pressure spraying
Consumption
0.2 lt - 0.8 lt/m2
Packaging
5 lt containers

Download
KEIM Lotexan®N
KEIM Lotexan N was developed as a dedicated generic variant of KEIM Lotexan for mineral substrates which have a lower alkalinity, such as weathered natural stone.
Colour shade
Colourless
Application
Brush, low pressure spraying
Consumption
0.2 lt - 0.8 lt/m2
Packaging
5 lt containers
KEIM Ecotec®
KEIM Ecotec is an environmentally friendly, solvent free, colourless water repellent and dust suppressant. KEIM Ecotec is a concentrated hydro-phobing silicone micro-emulsion, diluted with water, which reduces water absorption.
Colour shade
Colourless
Application
Brush, flooding
Consumption
1 part concentrate + 9 parts of water approx. 0.2 - 0.8 l/m2 (ready-to-use mix)
Packaging
1 lt container

Download
KEIM Fixativ
KEIM Fixativ is a silicate binding agent and dust suppressant which reacts chemically to consolidate the surface. KEIM Fixativ is water vapour permeable and is suitable for external and internal use on surfaces with light chalking and dusting.
Colour shade
Clear
Application
Brush or airless spray
Consumption
Approx. 0.1 l/m2
Packaging
4 lt containers

Download
KEIM Silan-100
KEIM Silan 100 is a waterproofing primary coat which can be used as a hydrophobic impregnation for mineral substrates prior to the application of KEIM Mineral Paints. KEIM Silan 100 can only be applied onto bare surfaces.
KEIM Silan 100 also has the ability to resist the passage of some waterborne salts and can be used for this purpose.
Colour shade
Colourless
Application
Brush, flooding with low-pressure spray gun
Consumption
0.2lt/m2 for one coat, 0.3lt/m2 for two coats
Packaging
5 lt containers

Download
Product information
Product information such as product brochures, technical data sheets, safety data sheets etc can be found here...