EFFECTIVE MOULD PROTECTION FOR INDOORS

Mould sometimes simply forms over the course of time. No exact causes can be pinpointed – the house or apartment and its walls have simply become a bit old. Health risks are minimal; the affected surface is no larger than approximately 0.4 m². In such cases, it is often sufficient to thoroughly clean the affected areas with a suitable mould remover and then use a special coating..

In the case of severe mould damage, a thorough search for the cause and planning of further measures to combat recurrence are absolutely necessary. The spores that are present must be trapped and the affected structural components need to be replaced, at least the render. In order to prevent this from happening in the future, a subsequent system with mould-sanitation or insulation panels is recommended.

KEIM Mycal® References

Overview of KEIM Mycal System Products

KEIM Mycal®-Top

KEIM Mycal-Top is a highly specialised interior silicate paint with different effect approaches against mould contamination. The enormous diffusion potential and the humidity-regulating properties provide dry walls. It creates an alkali depot and thus demonstrably does not offer a nutrient base to mould.

Colour shade
White, KEIM Palette exclusiv, tinting with KEIM colour concentrates.

Application
Brush, roller, sprayer

Consumption
For two coats: 0.25 l/m² + approx. 0.02 l KEIM Spezial-Fixativ

Packaging
5 l and 15 l containers
Pallet: 24 x 15 l / 70 x 5 l

KEIM Mycal®-Ex

Chlorine-free,  high-concentrated, aqueous oxidising agent for the pretreatment and purification of microbially loaded or contaminated interior wall surfaces. It reacts to water and oxygen.


Use disinfectants safely. Always read label and product information before use.

Colour shade
Yellowish transparent

Application
Brush

Consumption
Approx. 0.1 l/m²

Packaging

1 l, 5 l and 25 l containers
Pallet: 24 x 25 l

KEIM Mycal®-Fix

Siliceous pretreatment agent for binding fungal spores and for priming KEIM Mycal-CS-Platten (panels) and strongly absorbing substrates.

KEIM Mycal-Fix has a consolidating effect and regulates absorbency. It binds mould and spores on the contaminated areas. Due to the high pH-value KEIM Mycal-Fix also hinders mould growth.

Packaging
5 l and 20 l containers
Pallet: 24 x 20 l / 96 x 5 l

KEIM Mycal®-Por

Lime-bound factory prepared dry mortar according to DIN EN 998-1 of mortar category CS I (PII according to DIN V 18550). Mineral, special lime plaster for indoors with particular sorption- and moisture-regulating properties. Also used as adhesive and reinforcing compound for the KEIM Mycal-CS-Platte and for the KEIM iPor-Novo-Mineraldämmplatte (interior insulation).

Colour shade
White

Application
Trowel , rendering machine, blunger

Consumption
Approx. 3.9 kg/m² at 3 mm layer thickness as render,
approx. 5 - 6 kg/m² as adhesive and reinforcement

Packaging
25 kg bags
Pallet: 42 x 25 kg

KEIM Mycal®-CS-Platte (panel)

Mineral, lightweight calcium silicate panel, non-flammable A1 according to DIN 4102 to prevent condensed water and mould growth, and therefore,
to provide a healthy indoor climate.
The panel can also be used to improve the interior thermal insulation.

Panel format 100 x 62.5 cm
Panel thickness 25 mm

Packaging
Pallet with 48 panels = 30 m²
Pallet with 16 panels = 10 m²
only by the pallet

KEIM Mycal®-CS-Dämmkeile (insulation wedges)

Mineral, non-flammable, made of calcium silicate, for the reduction of thermal bridges in the ceiling and wall connection area and for the optical adaption of welts of abutting surfaces.

Format 125 x 50 cm
Panel thickness 30 - 8 mm

Packaging
4 pcs/carton

 

KEIM Mycal®-CS-Dämmkeile

KEIM Mycal®-CS-Laibungsplatte (reveal panel)

Mineral, non-flammable, made of calcium silicate, used for window and door reveal areas.

Panel size 25 x 50 cm
Panel thickness 15 mm

Packaging
20 pcs/carton

 

KEIM Mycal®-CS-Laibungsplatte

KEIM Mycal®-Lava-Raumklimaplatte

Mineral, incombustible render carrier plate for interior spaces. Particularly suited to prevent condensed water and mould growth thanks to its high-performance combination of moisture-regulating and heat-insulating properties.

Rated value of thermal conductivity:
d= 25 mm 0.055 W/mK
d= 30 mm 0.050 W/mK

Panel size: 625 mm x 416 mm.

Packaging
in a handy carton

Panel thickness mm m² per carton m² per palette
25 3,12 56,16
30 2,6 46,8

 

SYSTEM RELATED AND COMPLEMENTARY PRODUCTS

KEIM Gewebe-Eckwinkel Spezial 4x4

Corner angle with plastic reinforcement

View product
KEIM Glasfaser-Gittermatte 4x4

Fibre mesh, non-slip, alkali-resistent

View product
KEIM Apu-Gewebeleiste Mini

Self-adhesive plastering strip, no fabric, for interior use

View product
This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
More details