The coating solution for asbestos cement!!
Special cases, in which the focus is put on inflammability, light stability, insensitivity to moisture and permanent adhesion, require innovative solutions. We have found these solutions in the form of mineral coatings, and have completed some difficult projects very successfully.
Coatings on fibre cement and/or asbestos cement panels, in particular, make great demands of the material. The ready-to-use silicate paints from KEIMFARBEN mean that these difficult substrates can be coated as required.
OVERVIEW OF THE KEIM TEKNOSIL® SYSTEM PRODUCTS
KEIM Teknosil is a ready-to-use silicate paint as per EN 1062 with absolutely lightfast, inorganic pigments and mineral fillers. KEIM Teknosil’s properties were engineered for the specific requirements of asbestos cement and/or fibre cement panels.
KEIM Teknosil is water-repellent, highly water vapour permeable and protects the substrate from weather influences and further disintegration by UV light
White, KEIM Palette Exclusiv, full tone colours 9001 - 9010 based on KEIM colour concentrates
Brush, roller, airless spraying (nozzle size: 0.79 mm/0.03 in.)
For two coats: approx. 0.35 kg/m² KEIM Teknosil + approx. 0.02 l KEIM Teknosil-DL
2.5 kg, 5 kg and 25 kg container,
full tone colours in
20 kg container
Pallet: 24 x 25 kg / 70 x 5 kg
KEIM Teknosil®-DL (Dilution)
KEIM Teknosil-DL is a silicate dilution and primer for KEIM Teknosil coating. Plus, KEIM Teknosil-DL is used to bind residual fibres when asbestos-containing fibre cement wall panels and plates or their substructure are removed.
5 l and 20 l container
Pallet: 24 x 20 l / 96 x 5 l