Windowsills must meet the optical and structural-engineering requirements. The rainproof connection to the ETIC systems and protecting the covered railing against dirt through sufficient protrusion should always be considered during the planning. KEIM windowsills provide you with an ideally suited system solution.

OVERVIEW OF KEIM ETICS WINDOWSILL SYSTEMS

KEIM Fensterbank (Window ledge)

Aluminium window ledge with self-adhesive protective film.

Determination of reaches and lengths:

Reach
The calculation of the window ledge reach results from the reveal depth + system thickness + 40 mm overlap.

Length of window ledge

• In case of prior installation and using KEIM end caps the window ledge reach is calculated from the final dimension + 34 mm
• In case of subsequent installation and using KEIM Klinkerendkappe (clinker end caps) the window ledge length is calculated usually from the final clear measure -20 mm.

Colour shade
Natural anodised, white

Reaches
110 - 130 - 150 - 165 - 180 - 195 - 210 - 225 - 240 - 260 - 280 - 300 - 320 - 340 - 360 mm

Length according to specification.
Special reaches and RAL-colours on request.
Please note longer delivery times.

KEIM Endkappe (End cap)

With integrates sealing shoe for double-sided expansion compensation of the window ledge.
Reaches: 110 mm - 360 mm, 1 pair per window ledge.

KEIM Endkappe (End cap)

KEIM Klinkerenkappe (Clinker end cap)

Aluminium end cap, driving-rain proof to a limited extent, without expansion compensation of the window ledge, for the subsequent installation of window ledges.
Reaches: 110 mm - 360 mm
1 pair per window ledge

KEIM Klinkerenkappe (Clinker end cap)

KEIM Fensterbankhalter (Window ledge bracket)

For bottom side anchoring of the window ledge to masonry size 1-8.

Special reaches and RAL colour shades on request.
Please note longer delivery time.

  Thickness of insulation panels (mm)
Größe 1 30 - 50
Größe 2 50 - 80
Größe 3 60 - 120
Größe 4 120 - 180
Größe 5 140 - 200
Größe 6 180 - 240
Größe 7 220 - 280
Größe 8 280 - 360
KEIM Fensterbankhalter (Window ledge bracket)

KEIM Antidröhnband (Anti-droning tape)

Reduces raindrop noise. To be glued to the underside of the window ledge.

Width
80 mm

Length
1 m

KEIM Antidröhnband (Anti-droning tape)

KEIM Abdichtprofil (Sealing profile)

Rubber seal of the window ledge to the cladding frame.

KEIM Abdichtprofil (Sealing profile)

KEIM Stoßverbinder (Connector)

Suitable for the KEIM Fensterbank, for window ledges with a total length of 3 m.
Reaches: 110 mm - 360 mm

KEIM Stoßverbinder (Connector)

KEIM Fensterbankschrauben (Window ledge screws)

Cross-head, 22 mm long.
For fastening the window ledge, incl. plastic cover caps in natural or white. 

Packaging
100 pcs/carton

KEIM Fensterbankschrauben (Window ledge screws)

Note for the window ledge installation

The screw-on bridge has to be connected to the cladding frame with a suitable joint sealing tape (e.g. KEIM Fugendichtband type 20/3) for a driving rain-tight window ledge (KEIM Fensterbank) installation without using KEIM Abdichtprofil (sealing profile).

For the subsequent installation of a window ledge the following products are recommended for creating a driving rain-proof connection:

Sealing membrane: SikaMembran Outdoor, Illbruck ME501 TwinActiv HI

Adhesive: SikaBond TF plus N, Illbruck SP351

Sealant:
Sikaflex AT-Connection, Illbruck SP525

Sealing coat: Illbruck SP925

Note for the window ledge installation

This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
More details