The correct execution of an ETIC Systems plinth often requires special measures, e.g. with respect to protection against moisture. Special insulation panels are often needed. In such cases, separating the plinth from the ETIC Systems is recommended. The KEIM plinth-end profile guarantees a proper and aesthetically-attractive design and execution.
OVERVIEW OF THE KEIM PLINTH-END SYSTEM PRODUCTS
KEIM TEC-Platte
Calcium silicate panel for particularly impact-resistant KEIM ETIC systems and for the renovation of old ETIC systems. KEIM TEC-panels are mounted onto the insulation panels which guarantees a significantly higher compressive and impact strength.
Use category I according to ETAG 004.
KEIM Tec-Platte is suited for substrate preparation of substrates not suitable for gluing.
Packaging unit:
1 piece
Panel size 125 x 120 cm
Panel thickness 10 mm
Alternative delivery unit on request (only by the pallet):
125 x 300 cm
Packaging unit: 1 pallet = 30 pcs = 112.5 m²
125 x 285 cm,
Packaging unit: 1 pallet = 40 pcs = 142.5 m²
Download
KEIM TEC-Fräser
To countersink the anchor plate Ø 60 mm into the KEIM TEC-Platte.
Packaging unit
1 piece
KEIM PVC-Sockelgrundprofil (Plinth base profile)
Base profile in connection with KEIM Sockeleinsteckprofil (plinth plug-in profile) to create thermal bridge-free connections between ETIC and plinth insulation.
Insulating panel thickness: 60 - 240 mm
Length: 2.00 m
Consumption
1 m/m
Packaging unit
1 carton = 10 pcs or 20 m
Packaging
For panel thicknesses:
60 - 90 mm = 1 carton
100 - 160 mm = 1 carton
180 - 240 mm = 1 carton
Download
KEIM PVC-Sockeleinsteckprofil (Plinth plug-in profile)
Plug-in profile also in connection with KEIM Sockelgrundprofil (plinth base profile) to create variable, thermal bridge-free connections between ETICS and plinth insulation.
Mesh size of fabric: 4 x 4 mm
Insulating panel thickness: 60 - 240 mm
For reinforcement/plaster thicknesses up to 7 mm
Length: 2.00
Consumption
1 m/m
Packaging unit
1 carton = 10 pcs or 20 m
Packaging
For panel thicknesses:
60 - 90 mm = 1 carton
100 - 240 mm = 1 carton
Download
KEIM Alu-Sockelprofilleiste (Aluminium plinth profile)
Aluminium profile with drip edge for all KEIM ETIC systems.
Length: 2.50 m
Reaches: 22 mm - 302 mm (20-mm-wise)
(Reaches from 222 mm come in two pieces)
Consumption
0.4 pc./m
Packaging unit
22 - 102 mm = pack of 10 pcs
122 - 202 mm = pack of 6 pcs
222 - 302 mm = pack of 4 pcs
Packaging
1 Pack
KEIM KS-Aufsteckprofil 10 (Plug-on profile for thick-layer reinforcement)
Special plug-on profile made from plastic with mesh for thin-layer reinforcements. To plug onto the KEIM Sockelprofilleiste (plinth profile), for 10 mm render thickness.
Length: 2.50 m
Consumption
1 m/m
Packaging unit
15 pcs/carton
Packaging
1 carton
KEIM KS-Aufsteckprofil 6 (Plug-on profile for thin-layer reinforcement)
Special plug-on profile made from plastic with mesh for thin-layer reinforcements. To plug onto the KEIM Sockelprofilleiste (plinth profile), for 6 mm render thickness.
Length: 2.50 m
Consumption
1.1 m/m
Packaging unit
15 pcs/carton
Packaging
1 carton
KEIM Sockelprofilverbinder (Plinth profile connector)
For the connection of horizontally mounted plinth profiles.
Packaging
100 pcs/ carton
KEIM Schlagdübel ND-K
Nail anchor to fasten plinth profiles.
Colour shade
Grey
Consumption
3 pcs/m
Packaging
100 pcs/carton
Technical data
Anchorage depth: 25 mm
6 x 60: anchor diameter: 6 mm, lenght: 60 mm
8 x 80: anchor diameter: 8 mm, length: 80 mm
KEIM Distanzstücke (Spacers)
KEIM Distanzstücke (spacers) to compensate uneven substrates under plinth and fixing profiles.
Thicknesses: 3 mm, 5 mm, 8 mm, 10 mm, 15 mm
Packaging
100 pcs/carton
