KEIM interior-insulation systems – the effective alternative
It is unfortunately the case that those buildings with the most artistically decorative facades have the worst heat insulation, but in most cases they also feature generously-sized rooms and interior spaces. 10 cm less for a cosy home. With our KEIM interior climate systems, you don't have to make any more compromises. Why not just find out for yourself! There are good reasons for interior insulation.
- Richly decorated facades
- Elaborate details
- Residential property in a multiple-dwelling house
- Temporary building use
- Adherence with the construction boundaries
MOULD PROTECTION, FUNCTIONAL INTERIOR INSULATION OR...
Depending on demands and expectations, you can configure your system for simple mould protection, functional interior insulation or as a premium structure with the best possible climate properties for interior spaces. All variations have one in thing in common: they can be created using just three components, and require little effort.
a render mortar for adhesion, reinforcement and as a top render.
mineral render carrier plate for interior spaces
mineral coatings that are free of any harmful substances and which promote a healthy living environment
Interior insulation systems do not have to be wrapped-up airtight from the ambient air – quite the opposite, in fact: One realisation has become increasingly more prominent: that capillary-active systems, which can deal with the moisture that occurs in room air, have shown themselves to be far less prone to installation errors or subsequent penetration, as well as having a particularly positive influence on the room climate. Calculations can easily furnish proof of which thermal bridges establish themselves.
In the case of insulation panel thicknesses starting from 50 mm, the system should always be well planned and recalculated, to ensure that the result continues to please over the long term.
PARTICULARS WHEN IT COMES TO RENDER AND COATING STRUCTURE
Why a KEIM iPor system?
The iPor system is a capillary-active interior insulation system that is easy-to-create and which is open to diffusion. Complicated installation details for creating a vapour-tight level are not necessary. To prevent thermal bridges occurring on jambs or integrated interior walls, reliable accessories are available.
OVERVIEW OF THE SYSTEM COMPONENTS
KEIM iPor®-TIPwall
Capillary-active, permeable, fibre-free, mineral, solid insulation panel made of calcium silicate hydrates, biologically harmless and fully recyclable. Incombustible A1 as per DIN EN 13501-1, officially approved.
Panel size: 600 x 390 mm
Panel thickness: 60/80/100/120/140/160/180/
200 mm (220-300 mm on request)
Rated value of thermal conductivity: 0.042 W/mK
Compressive strength on average: at least 200 kPa
Density range from 85 to 95 kg/m3
Panel thickness: 50 mm
Rated value of thermal conductivity: 0.045 W/mK
Compressive strength on average: at least 300 kPa
Density range from 110 to 115 kg/m3
Packaging:
panel thickness mm | m² per pallet | bunch per pallet |
| 50 | 33,7 | 18 |
| 60 | 28,08 | 12 |
| 80 | 21,06 | 18 |
| 100 | 16,85 | 12 |
| 120 | 14,04 | 12 |
| 140 | 11,23 | 12 |
| 160 | 9,83 | 12 |
| 180 | 8,42 | 12 |
| 200 | 8,42 | 12 |
* Only by the pallet
Multipor Reveal
Insulation panel especially suitable for window and door reveals.
Rated value of thermal conductivity: 0.047 W/mK.
Panel size: 60 x 25 cm
Panel thickness: 20 - 30 - 40 mm
Packaging
20 mm - 12 pcs/carton = 1.8 m²
30 mm - 8 pcs/carton = 1.2 m²
40 mm - 6 pcs/carton = 0.9 m²
Multipor Wedge
Capillary-active, permeable, fibre-free, mineral, solid insulation panel made of calcium silicate hydrates, biologically harmless and fully recyclable.
Incombustible A1 as per DIN EN 13501-1. To reduce thermal bridges in ceiling and wall connection areas and for visual alignment of abutting edges.
Panel size: 500 x 390 mm
Panel thickness: wedge-shaped 60/20 mm
Rated value of thermal conductivity: 0.042 W/mK
Packaging: 10 pcs/carton
KEIM Mycal®-Lava
Mineral, incombustible room climate panel for interior spaces. Particularly suited to prevent condensed water and mould growth thanks to its high-performance combination of moisture-regulating and heat-insulating properties.
Rated value of thermal conductivity:
d = 25 mm 0.055 W/mK
d = 30 mm 0.050 W/mK
d ≥ 50 mm 0.045 W/mK
Panel size: 625 mm x 416 mm.
Packaging
Handy cardboard box
| Panel thickness mm | m² per carton | m² per palette |
| 25 | 3.12 | 56.16 |
| 30 | 2.6 | 46.8 |
| 50 | 1.56 | 28.08 |
| 60 | 1.3 | 23.4 |
| 80 | 1.04 | 18.72 |
Note: Mycal-Lava room climate panels can be supplemented with all accessory parts from the room climate systems.
Download
KEIM Apu-Leiste Mini
Plastering and sealing strip without fabric, with self-adhesive PE tape and protective flap. It is used as plaster edge and for sealing the connecting joints between frame and insulation. Suitable for interior use.
Length: 1.40 m, 2.40 m
Consumption
1,1 m/m
Packaging
Pack of 20 pcs
Reinforcing mesh belonging to the system, alkali-resistant, non-slip.
→ To the product