Anchoring the insulation panels is absolutely mandatory for many systems. Which type of dowels are used, and how many, depends on a variety of factors. At least the certifications of the system, insulation materials and dowels need to be taken into account.

What should you know?
Condition of the substrate

  • Type of insulation material
  • Suitability of the insulation material to be dowelled.
  • Location of the reinforcement mesh compared to the dowel
  • Requirements in terms of the dowel's chi-value


OVERVIEW OF DOWELS FOR KEIM ETIC SYSTEMS

EJOTHERM STR U 2G (screw anchor)

Universal screw-in cap anchor for concrete, solid and perforated building material and aerated concrete, use categories acc. to A-B-C-D-E.
Approved anchor for EPS- and mineral wool panels acc. to European Technical Approval ETA-04/0023, Z-21.2-1769.

Countersunk installation from 100 mm panel thickness, also in combination with KEIM Teller VT 2G (plate), depth of drill hole 50 mm (90 mm) in the substrate. Countersinking and screwing in one step. Closing of insulating material with the appropriate STR cap to avoid anchor marks being shown.

Installation flush with the surface from 60 mm panel thickness, drill hole depth 35 mm (75 mm) in the substrate. Installation with the STR-tool 2G, can be combined with Teller (plate) SBL 140 plus and Teller (plate) VT 90, closing of anchor sleeve with STR-plug made of polystyrene. Anchor load category: see ETA-04/0023

Technical data

Anchorage depth 25 mm
65 mm for aerated concrete
Anchor diameter 8 mm
Plate diameter 60 mm
Lengths 115 - 135 - 155 - 175 - 195 - 215 - 235 - 255 - 275 - 295 - 315 - 335 - 355 - 375 - 395 - 415 - 435 - 455 mm

 

Order length = insulation material thickness + layer thickness of adhesive + possibly existing render thickness + anchorage depth

Colour
White

Packaging
ejotherm STR U 2G:
100 pcs/carton

STR-cap-EPS:
100 pcs/carton

STR-cap-EPS grey:
100 pcs/carton

STR-cap-MW:
100 pcs/carton

STR-tool-2G:
piece

STR-plug:
500 pcs/carton

EJOTHERM STR U 2G (screw anchor)

Hilti HTR-P Schraubdübel (screw anchor)

Countersunk installation in combination with ejotherm STR-U 2G from 100 mm panel thickness in mineral wool insulation panels type WAP-zg. Countersinking and screwing in one step. Closing of insulating material with STR-Rondelle-MW cap to avoid anchor marks being shown.

Technical data:

Plate diameter: Approx. 110 mm

Colour: white

Packaging: 100 pcs/ carton

Hilti screw anchor

KEIM Teller SBL 140 PLUS (Plate)

In combination with STR U 2G (flush with the surface), NTK U and H1-ECO anchors for fixing MW-Lamellae.

Packaging
100 pcs/carton

KEIM Teller SBL 140 PLUS (Plate)

KEIM Teller VT 90 (Plate)

In combination with STR U 2G (flush with the surface), NTK U and H1-ECO anchors for fixing MW-Panels, application type WAP-zg.

Packaging
100 pcs/carton

KEIM Teller VT 90 (Plate)

KEIM Teller VT 2G (Plate)

Countersunk installation in connection with ejotherm STR-U 2G from 100 mm panel thickness in mineral wool insulation panels type-WAP-zg. Countersinking and screwing in one step. Closing of insulating material with the appropriate STR cap MW to avoid anchor marks being shown.

Plate diameter: approx. 110 mm

Colour shade
White

Packaging
100 pcs/carton

KEIM Teller VT 2G (Plate)

ejotherm NTK U – Schlagdübel (Hammer-in anchor)

Hammer-in anchor with plastic nail and plate, premounted, for concrete, solid and perforated building material, use categories A-B-C.
Approved anchor for EPS and mineral wool panels, acc. to European Technical Approval ETA-07/0026, Z-21.2-1844.
Defined pull-in of the plate through telescope effect, can be combined with Teller (plate) SBL 140 plus and Teller (plate) VT 90.;

Technical data

Anchorage depth 40 mm
Anchor diameter 8 mm
Plate diameter 60 mm
Längen 90 - 110 - 130 - 150 - 170 - 190 - 210 - 230 mm

Colour shade
White

Packaging
Length 90 - 150 mm:
200 units/carton
Length 170 - 230 mm:
100 units/carton

ejotherm NTK U – Schlagdübel (Hammer-in anchor)

ejotherm H1-eco Schlagdübel (Hammer-in anchor)

Hammer-in anchor with steel nail and plastic sleeve for concrete, solid and perforated building material, use categories A-B-C-D-E.

Approved anchor for EPS and mineral wool panels acc. to European Technical Approval ETA-11/0192. Easy to install due to premounted steel pin with plastic sleeve (plate Ø 60 mm). Can be combined with KEIM Teller (plate) SBL 140 plus and KEIM Teller (plate) VT 90.

Technical data

Anchorage depth 25 mm
Anchor diameter 8 mm
Plate diameter 60 mm
Lengths 95 - 115 - 135 - 155 - 175 - 195 - 215 - 235 - 255 - 275 - 295 mm

Colour shade
White

Packaging
100 pcs/carton

ejotherm H1-eco Schlagdübel (Hammer-in anchor)

ejotherm STR-H A2 / ejotherm STR-H (Cap anchors)

ejotherm STR-H A2

Screw-in cap anchor for the constructive dowelling of mineral wool panels onto wooden substrates according to Z-33.47.727. Countersunk installation or flush with the surface is possible with TORX Bit T25.

ejotherm STR-H

For constructive anchoring of EPS panels onto wooden substrates

Countersunk installation or flush with the surface is possible with TORX Bit T25.

 

 

Technical data

Anchorage depth 30 mm
Plate diameter 60 mm
Lengths 80 - 100 - 120 - 140 - 160 - 180 - 200 - 220 - 240* - 260* - 280* - 300* mm (*only as STR-H variant available)

Colour shade
White

Packaging
100 pcs/carton
incl. STR-plugs

ejotherm STR-H A2 (Cap anchor)

KEIM DrillX Bohrerverlängerung (drill extension)

Drill extension with SDS-shank, for the use of short hard metal hammer drills with taper fitting for KEIM DrillX Ersatzbohrer (spare bit).

Length
200, 270 mm

Packaging
1 piece incl. ejector

KEIM DrillX Bohrerverlängerung (drill extension)

KEIM DrillX Ersatzbohrer (spare bit)

Hard metal hammer drill bits for KEIM DrillX Bohrerverlängerung (drill extension) with tapered end.

Length
100, 150, 250 mm

Drill diameter
8 mm

Packaging
10 pcs

KEIM DrillX Ersatzbohrer (spare bit)

Sanierfräse (Renovation milling cutter)

For mounting plate anchors flush with the surface when renovating facades in ETICS.

Packaging
1 piece

Sanierfräse (Renovation milling cutter)

Spezialbohrer (Special drill bit for perforated material)

For careful drilling into delicate material

Length
260, 310 mm

Drill diametre
8 mm

Packaging
1 piece

Spezialbohrer (Special drill bit for perforated material)

fischer termoz SV II ecotwist

Screw dowel for ETIC systems KEIM EPS and KEIM MW-S2 from 100 mm according to ETA-12/0208 and Z-21.2-1960. Countersunk installation in one work step. Use category: A-B-C-D-E
Dowel lengths for insulation material thicknesses from 100 mm up to 400 mm.
3 Dowel types for tolerance compensation of the existing substrate (tolerance compensation corresponds to the sum of non-bearing layers like render or adhesive).
Installation opening can be closed with PU foam or plug. 

Technical data

Dowel type Length Tolerance compensation Drill hole depth
= insulation material thickness plus
0-10 162 mm 0-10 mm 55 mm
10-30 202 mm 10-30 mm 75 mm
30-60 232 mm 30-60 mm 105 mm

 

Shank diameter: 8 mm

Colour shade
White

Packaging
100 pcs/carton

fischer termoz SV II ecotwist

fischer termoz SV II ecotwist installation tool

Obligatory setting tool for the ecotwist anchor. Universal, can be adjusted according to the respective insulation material thickness with a visual marking for the setting depth.

In combination with anchors STR U 2G (flush with the surface), NTK U and H1-eco for fixing mineral wool insulation panels, application type WAP-zg.

Size Insulation material thickness
260 100 mm bis 260 mm
400 100 mm bis 400 mm

Packaging
1 pc./carton

fischer termoz SV II ecotwist installation tool

This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
More details