Assembly elements for thermal insulated facades

For the execution and simultaneous thermal bridge avoidance in the statically relevant fixation of loads in heat-insulating facades, there are general elements authorised by the construction inspection authorities for high levels of safety and security. Punctual planning is essential for ensuring that the arrangement of the elements and statistical measuring meet all the requirements.

The authorised fixations are to be chosen via statistical measuring, and should be assembled prior to starting the insulation work. They must also be accepted by the third-party company responsible for the assembly, or carried out by the third-party company itself.

OVERVIEW OF KEIM ASSEMBLY ELEMENTS

Connection to facade elements

A professional and permanently durable connection to façade elements such as windows and doors might require a variety of specific product solutions which we provide according to individual requests.

You will find information about the selection in our technical documents or via technical consulting.

 

 

  

Connection to facade elements

Dosteba Rondoline Ø 90 / 125 (incl. milling tool)

Pressure-resistant and CFC-free polyurethane support element for professional fastening of pipe clamps, coat-hanger rails, railings, awnings and outside lamps in ETIC systems.
Lightweight purchased parts can be fixed thermal bridge-free directly in the cylinder.
Anchoring in the masonry as base for high compressive loads.
To be glued with KEIM Pulverkleber 90.

Colour shade
Black

Thickness
60 - 300 mm

Thermal conductivity
PU λ 0,04 W/mK

Milling tool: Ø 90 / 125 mm
Packaging 1 piece

Compressive force PD:
1.1 kN (Ø 90 mm)
2.1 kN (Ø 125 mm)
on the complete cylinder surface

KEIM Extension up to 340 mm
Packaging:1 piece
 

 

Dosteba Rondoline Ø 90/125 mm

Dosteba Quadroline PU

Base for high compression loads
198 x 198 mm
To be glued with KEIM Pulverkleber 90

Colour shade
Yellow

Thickness
60 - 300 mm

Thermal conductivity
PU λ 0,04 W/mK

Permissible compressive strength
5.9 kN on the complete surface

Packaging
1 piece

Dosteba Quadroline PU

Ejot Iso Corner

Generally approved mounting bracket for thermal bridge-free installation of purchased parts, e.g. French balconies, railings, fall protections or shutter catches. Required screws: EJOT Delta PT 100.
Fastening screws depend on the substrate. Mounting element has to be exactly cut to length on the construction site. Approval upon request.

Colour shade
anthracite

Packaging
1 piece

Sizes available
140 mm, 200 mm

Accessories
EJOT Delta PT 100

Ejot Iso Corner

Ejot Spiraldübel (Spiral anchor)

For the subsequent fixation of lightweight elements such as door signs on finished ETIC systems. Recommended service load for EPS panels: 3 kg
For MW panels: 1 kg
Cannot be used for the XPor-System!

Packaging
10 pcs/bag

  

Ejot Spiraldübel (Spiral anchor)

Dosteba Montageplatte DoRondo (Mounting plate)

For thermal bridge-free installation of purchased parts, e.g. guide rails for exterior venetian blinds, lightweight signs, temperature sensors, directly in the mounting plate.

Colour shade
Blue

Thickness
10 mm

Diameter
90 mm

Usable surface
70 mm

Packaging
20 pcs/carton incl. milling tool

Dosteba Montageplatte (Mounting plate)

This site uses cookies. If you continue surfing on this site, you agree to the use of cookies.
More details